全自动灌装流水线DG-GZX-200L

系统特点及功能/Features

■ 控制系统采用 可编程控制器I/O PLC模块等高端电气配件制造，性能可靠、后期维护成本低；
     The control system adopts the high-end electrical parts such as programmable controller I/O PLC module, which has reliable performance and low maintenance cost.

■ 密封及软连接部分采用特氟龙制造，耐溶剂，耐酸碱，寿命长；
      
    The sealing and soft connection uses Teflon, which is solvent resistant, acid and alkali resistant and has long service life.

■ 系统采用两段式大、小料可调灌装方式，提高了准确度及生产能力；
    The system adopts two-stage adjustable filling mode for the large and small materials, which improves the accuracy and productivity.

■ 目标量自由设定，适应多种重量范围的定量灌装；
 The filling quantity can be set freely, which is suitable for quantitative filling in various weight ranges.

■ 全触摸屏英文动画操作，全示教模式操作引导、可显示目标量、灌装量、桶数、累计量等信息；
 Full Touch Screen  is English Animation Operation, Full Teaching Mode Operation Guidance, Display Target Quantity, Filling Quantity, Bucket Number, Cumulative Quantity and so on.


■ 系统采用全英文向导式操作，记忆工作组参数、及配方。醉大存储100组参数、。
The system uses all-English  guided operation to memorize working group parameters and formulas. Maximum storage of 100 sets of parameters,.


■ 设备可扩展以太网接口/DP/NET接口，方便后期工厂数据集中控制与集成监控。
 The device can extend the Ethernet interface/DP/NET interface to facilitate centralized control and integrated monitoring of factory data in the later stage.

基本参数 

■ 灌装物料名称: 脂、溶剂、涂料、油漆等。

■ 包装重量：1200KG

■ 醉小感量：10g

■ 灌装误差: 0.2%

■ 灌装速度：30-60pcs/h（关联人工上桶操作速度，及供料速度）

■ 控制方式：3挡控制（快、中、慢）

■ 灌装方式: 液面上

■ 秤台尺寸：定制

■ 灌装头: SS316L不锈钢及特氟龙

■ 结构材质: SUS304不锈钢

■ 滚筒材质：复合不锈钢

■ 管路压力：0.2-0.6MPa(与料性有关)。

■ 物料接口：DN40法兰，可指定（物料及供料后端管道由贵方提供）

■ 气源接口：用户提供8mm气管接头，用于快速接头连接

■ 使用电源：AC220/50Hz(用户提供至机器一侧)

■ 使用气源：0.4-0.8Mpa(用户提供至机器一侧)

■ 使用温度：-10℃-50℃

Basic parameters           

Filling material name: grease, solvent, paint, etc.           

Packaging weight: 30KG          

Minimum Sensitivity: 10g           

Filling accuracy: 0.2%          

Filling speed: 100-150 pcs/h (Relevant to manual barreling operation speed and feeding speed)           

Control mode: 3 gear control (fast, medium and slow)        

Filling method: liquid surface           

Scale size: 350*350 mm            

Gun Head Pipeline: SS316L Stainless Steel and Teflon          

Structural Material: SUS304 Stainless Steel           

Drum Material: Composite Stainless Steel            

Pipeline pressure: 0.2-0.6 MPa (related to material properties).            

Material Interface: DN40 Flange, which can be specified (Material and back-end piping supplied by you)           

Gas Source Interface: Users provide 8mm tracheal connectors for fast connection            

Power supply: AC220/50Hz (user supplied to machine side)            

Use of gas source: 0.4-0.8 Mpa (user supplied to machine side)            

Temperature: - 10 -50.