产品展示

基本参数

■ 灌装物料名称:液体。

■ 秤台感量：10g

■ 灌装误差: ≤±50g

■ 灌装速度:180桶/小时

■ 控制方式：手动/自动

■ 秤台尺寸：350*350mm 

■ 灌装头管路:SUS304不锈钢及特氟龙。

■ 结构材质:碳钢烤漆/不锈钢

■ 管路压力：0.2-0.6MPa。

■ 物料接口：DN40法兰SUS304。

■ 气源接口：用户提供8mm气管接头。

■ 使用电源：AC220V/380V/50Hz

■ 使用气源：0.6-0.8Mpa

■ 使用温度：0℃-90℃

系统特点及功能/Features

■ 控制系统采用 可编程控制器I/O PLC模块等高端电气配件制造，性能可靠、后期维护成本低；
     The control system adopts the high-end electrical parts such as programmable controller I/O PLC module, which has reliable performance and low maintenance cost.

■ 密封及软连接部分采用特氟龙制造，耐溶剂，耐酸碱，寿命长；
      
    The sealing and soft connection uses Teflon, which is solvent resistant, acid and alkali resistant and has long service life. 

■ 系统采用两段式大、小料可调灌装方式，提高了准确度及生产能力；
    The system adopts two-stage adjustable filling mode for the large and small materials, which improves the accuracy and productivity.

■ 目标量自由设定，适应多种重量范围的定量灌装；
 The filling quantity can be set freely, which is suitable for quantitative filling in various weight ranges.

■ 全触摸屏英文动画操作，全示教模式操作引导、可显示目标量、灌装量、桶数、累计量等信息；
 Full Touch Screen  is English Animation Operation, Full Teaching Mode Operation Guidance, Display Target Quantity, Filling Quantity, Bucket Number, Cumulative Quantity and so on. 


■ 系统采用全英文向导式操作，记忆工作组参数、及配方。可存储100组参数、。
The system uses all-English  guided operation to memorize working group parameters and formulas. Maximum storage of 100 sets of parameters,.


■ 设备可扩展以太网接口/DP/NET接口，方便后期工厂数据集中控制与集成监控。
 The device can extend the Ethernet interface/DP/NET interface to facilitate centralized control and integrated monitoring of factory data in the later stage.

公司简介