乔达环保供应DMF-Z-62S电磁脉冲阀 电磁阀两寸半直角脉冲阀 喷吹电磁阀 一只起订大量库存

     电磁脉冲阀简介：该阀系国外引进（亦称隔阂阀）是脉冲袋式除尘器清灰喷吹系统的紧缩空气“开关”受脉冲喷吹节制仪输出旌旗灯号的节制，该除尘配件对滤袋逐排（室）喷吹清灰，使除尘器的阻力坚持在设定的局限之内，以包管除尘器的处置才能和收尘效率。
　　电磁脉冲阀技能目标：任务压力：0.4～0.7,情况温度：-10～55(℃),运用介质：洁净空气，膜片寿命：喷吹100万次以上。
　　衔接螺纹：ZG2\"，长度：210mm，宽度：190mm，高度：200mm，分量：2.8kg
　　装置办法：电磁脉冲阀输入端(IN)，与储气筒金属管相衔接，其输出端与除尘箱喷吹管衔接，衔接螺纹间均填以 生料带紧固密封。

　　DMF-40直角电磁脉冲阀具有以下优点；

　　1．流体阻力小，密封面受介质的冲刷和侵蚀小。

　　2．开闭较省力。

　　3．介质流向不受限制，不扰流、不降低压力。

　　4．形体简单，结构长度短，制造工艺性好，适用范围广。

　　技术指标：工作压力：0.4～0.7, 环境温度：-10～55(℃), 使用介质：清洁空气，膜片寿命：喷吹100万次以上。

　　连接螺纹：ZG11/2"，长度：140mm，宽度：125mm，高度：170mm，重量：1.6kg

　　安装方法：电磁脉冲阀输入端(IN)，与储气筒金属管相连接，其输出端与除尘箱喷吹管连接，连接螺纹间均填以 生料带紧固密封。

　　该DMF-40电磁脉冲阀系国外引进（亦称隔膜阀）是脉冲袋式除尘器清灰喷吹系统的压缩空气“开关”受脉冲喷吹控制仪输出信号的控制，该除尘配件对滤袋逐排（室）喷吹清灰，使除尘器的阻力保持在设定的范围之内，以保证除尘器的处理能力和收尘效率。

DMF-40 right angle electromagnetic pulse valve has the following advantages;

1. The fluid resistance is small, and the sealing surface is less washed and eroded by the medium.

2. Opening and closing is more labor-saving.

3. The flow direction of the medium is not limited, and it does not disturb the flow and does not reduce the pressure.

4. The utility model has the advantages of simple shape, short structure length, good manufacturing process and wide application range.

Technical indicators: Working pressure: 0.4 ~ 0.7, Ambient temperature: -10 ~ 55 (°C), Use medium: clean air, diaphragm life: more than 1 million blows.

Connecting thread: ZG11/2", length: 140mm, width: 125mm, height: 170mm, weight: 1.6kg

Installation method: the electromagnetic pulse valve input end (IN) is connected with the metal tube of the gas storage cylinder, and the output end is connected with the dust blowing box blowing pipe, and the connecting thread is filled with the tetrafluoroethylene raw material tape to be tightly sealed.

The DMF-40 electromagnetic pulse valve is imported from abroad (also known as diaphragm valve). The compressed air "switch" of the pulse bag type dust collector cleaning system is controlled by the output signal of the pulse blowing controller. The dust removal accessory is for the filter bag. The ash is sprayed row by row (room) to keep the resistance of the dust collector within the set range to ensure the treatment capacity and dust collection efficiency of the dust collector.