-
¥98.50S216铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
-
¥98.50SCu6327铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
-
¥85.50ERCuAl-A2铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
-
¥85.50S222铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
-
¥85.50BRCuZn-C铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
-
¥85.50S221铜焊丝 锡铜焊丝 铜合金焊丝 贝达 斯米克牌
品牌 : |
贝达 |
型号 : |
100 |
牌号 : |
100 |
产地 : |
河北 |
类型 : |
药芯 |
材质 : |
合金 |
助焊剂含量 : |
2 |
加工定制 : |
是 |
焊丝直径 : |
1.2-1.6 |
熔点 : |
980 |
长度 : |
1550 |
重量 : |
15公斤 |
用途 : |
广泛 |
工作温度 : |
20 |
焊接电流 : |
180A |
是否含助焊剂 : |
是 |
适用范围 : |
广泛 |
D3978D112 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D112 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D132 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D172 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D212 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D256 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D258 | 1.21.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D397 | 1.21.6 | 50-55 (受强烈冲击后After high impact) | 用于受严重冲击高锰钢堆焊,加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
D55 | 1.21.6 | 60-65 | 高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
D60 | 1.21.6 | 60-65 | 高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) | 1.21.6 | ≥40 | 用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) | 1.6 | ≥50 | 用于堆焊推土机,螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) | 1.2/1.6 | ≥50 | 用于堆焊各种受磨损的机件表面,如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) | 1.21.6 | HB≥170 | 高锰钢堆焊,适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) | 1.21.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) | 1.6 | ≥55 | 用于堆焊各种冲模及切削刃具,兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
HB-YD327A(Q) | 1.6 | ≥55 | 专门用于模具堆焊,耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. |
HB-YD337(Q) | 1.6 | ≥48 | 用于铸钢或锻钢上堆焊锻模 Applied to repairforging dieatcast steelorforging steel. |
HB-YD397(Q) | 1.6 | ≥40 | 用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件 Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing. |
HB-YD405A(Q) | 1.6 | 50-59 | 用于热轧辊开坯辊堆焊 Applied to repair hot-rolling blooming rollor. |
HB-YD430A(Q) | 1.6 | 20-35 | 打底层堆焊焊丝 A backing hardfacing flux-cored Wires |
HB-YD488A(Q) | 1.6 | 45-50 | 用于轧辊堆焊 Applied to repair rollor |
HB-YD507Mo(Q) | 1.6 | 35-45 | 用于510℃以下中高压阀门堆焊 Applied to valve which operating tdivperature is less than 510℃. |
HB-YD518(Q) | 1.6 | 40-50 | 用于连铸辊堆焊 Applied to repaircontinuous caster roller |
HB-YD688(Q) | 1.6 | 50-60 | 用于磨煤辊打底焊(韧性好,可以多层堆焊) Used to coal roller backing welding. |
HB-YD788(Q) | 1.6 | 55-62 | 硬度高,可以多层堆焊。 High hardness andmulti-layer welding |
HB-YD888(Q) | 1.2, 1.6 | 60-65 | 硬度高,堆焊层厚度不超过6mm。 High hardness, but thethicknessofsurfacing layeris less than 6mm. |
HB-YD888Ni(Q) | 1.2 | 58-65 | 高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD988(Q) | 1.6 | 55-63 | 高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD990(Q) | 1.6 | 55-65 | 用于高温耐磨堆焊。 Applied to repair surface ofhigh tdivperaturewear parts. |
HB558 | 1.6 | 55-60 | 高温耐磨焊丝,用于化推焦机磨靴的堆焊。 high tdivperaturewear hardfacing wires, |
HB-YD67(Q) | 1.6 | 58-63 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD95(Q) | 1.6 | 55-63 | 高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-DG7(Q) | 1.6 | 52-60 | 地铁盾构刃口堆焊专用,也可用于煤碳石装载机料斗和刃口堆焊修复。 Applied to repair surface of high impact wear parts, such as shiled machine, excator bucket and hopper of mining machinery products. |
一、高铬合金耐磨铸铁系列产品
1、各种立破、反击破、PCK1312-1316破碎机锤头转子体护板,组合格板、界板,板锤,打击板等,是选矿厂、矿厂、水泥机械理想的耐磨配件。
2、各种高铬合金铸造铁、钨铬钼合金、耐火材料模具。
3、各种型号导卫板、导卫辊、成型辊、挤压辊、冷床滚辊等。
二、耐磨合金钢系列产品
各种型号颚破板、衬板、筛网、界板等,是选矿、矿山建陶、玄武岩矿的专用产品。
三、铸锰13系列产品
球磨机全套配件、雷蒙机弹子、磨环、对辊、颚板、碾底、PCK1312-1316转子体、格界板、锤头等。
四、各种碳钢、不锈钢、耐热钢、铸件。
五、来图定做,设计,并承接车,刨、磨、铣床加工等业务,本厂设计PCK系列破碎机,锤头,组合格板,界板以及各大选矿推广使用常用破碎机锤头材质有哪些
破碎机工作时磨料由下料斗进入破碎机腔体内,物料通过高速旋转锤头的碰撞来破碎物料;或者通过高度旋转的料盘将物料甩向筒体内壁的反击板,相撞后返回锤击区,受到板锤锤击而破碎物料。
目前铸造破碎机锤头材质有很多种,如铸造高锰钢系列、铸造合金钢系列和铸造高铬铸铁系列等。实际生产表明,各种材质制成的锤头,使用性能差异较大,因此,锤头材料要根据锤头使用情况等进行合理选择
产品适用范围
各种型号砖机及粉碎机
注意事项
注意安装牢固
一、高铬合金耐磨铸铁系列产品
1、各种立破、反击破、PCK1312-1316破碎机锤头转子体护板,组合格板、界板,板锤,打击板等,是选矿厂、矿厂、水泥机械的耐磨配件。
2、各种高铬合金铸造铁、钨铬钼合金、耐火材料模具。
3、各种型号导卫板、导卫辊、成型辊、挤压辊、冷床滚辊等。
二、耐磨合金钢系列产品
各种型号颚破板、衬板、筛网、界板等,是选矿、矿山建陶、玄武岩矿的专用产品。
三、铸锰13系列产品
球磨机全套配件、雷蒙机弹子、磨环、对辊、颚板、碾底、PCK1312-1316转子体、格界板、锤头等。
四、各种碳钢、不锈钢、耐热钢、铸件。
五、来图定做,设计,并承接车,刨、磨、铣床加工等业务,本厂设计PCK系列破碎机,锤头,组合格板,界板以及各大选矿推广使用常用破碎机锤头材质有哪些
破碎机工作时磨料由下料斗进入破碎机腔体内,物料通过高速旋转锤头的碰撞来破碎物料;或者通过高度旋转的料盘将物料甩向筒体内壁的反击板,相撞后返回锤击区,受到板锤锤击而破碎物料。
目前铸造破碎机锤头材质有很多种,如铸造高锰钢系列、铸造合金钢系列和铸造高铬铸铁系列等。实际生产表明,各种材质制成的锤头,使用性能差异较大,因此,锤头材料要根据锤头使用情况。
- 河北贝达焊接材料有限公司
- 董亮 销售
- 13730556272
- 河北省邢台市工业区107号
为您精选
- 斯米克银焊条 2% 5% 15% 银焊丝 25% 35% 45% 56%72%银钎焊料
- 美国赫伯特309MoL AC-DC E309Mo-16不锈钢药芯焊丝 现货
- 日本WEL MIG 308LSi不锈钢焊丝氩弧埋弧焊丝 ER308LSi焊丝 现货
- 法国沙福FILALU AlMg5铝镁焊丝ER5183铝焊丝 现货
- 法国沙福STEELCORED 37 E80T5-B3C-H4合金钢药芯焊丝 现货
- 供应 法国沙福AS 630埋弧焊丝 F8A10-EG-G焊丝 现货
- 台湾广泰KMS-630 ER630不锈钢气保护实芯焊丝 现货
- 美国阿克泰克AlcoTec铝合金焊丝铝镁ER5356 进口铝焊丝 铝焊丝批发 铝焊丝生产厂家
- 美国阿克泰克AlcoTec铝合金焊丝铝镁ER5087 进口铝焊丝 铝焊丝批发
- 金桥不锈钢焊丝ER304 308 309L 316L 2209二保焊丝不朽锈钢实心/药芯焊丝JQ-308L 气保焊氩弧焊
- 天津金桥不锈钢气保焊丝ER304-1.0mmMIG焊丝授权一级总代理
- 企业集采船王牌铝硅焊丝SAL4043,MIG焊丝,送丝顺畅性价比高