台湾奇美PC PC-108U（抗紫外线PC-108U）

台湾奇美PC PC-108U（抗紫外线PC-108U）

物理

密度：1.18－1.22 g/cm^3 线膨胀率：3.8×10^-5 cm/°C 热变形温度：135°C 低温-45°C

聚碳酸酯无色透明，耐热，抗冲击，阻燃BI级，在普通使用温度内都有良好的机械性能。同性能接近聚甲基丙烯酸甲酯相比，聚碳酸酯的耐冲击性能好，折射率高，加工性能好，不需要添加剂就具有UL94 V-0级阻燃性能。但是聚甲基丙烯酸甲酯相对聚碳酸酯价格较低，并可通过本体聚合的方法生产大型的器件。

PC（聚碳酸酯） 台湾奇美 PC-108U

PC（聚碳酸酯） 台湾奇美 PC-110

PC（聚碳酸酯） 台湾奇美 PC-110L

PC（聚碳酸酯） 台湾奇美 PC-110N

PC（聚碳酸酯） 台湾奇美 PC-110U

PC（聚碳酸酯） 台湾奇美 PC-110V

PC（聚碳酸酯） 台湾奇美 PC-115

PC（聚碳酸酯） 台湾奇美 PC-122

聚碳酸酯的耐磨性差。一些用于易磨损用途的聚碳酸酯器件需要对表面进行特殊处理。

分类

防静电PC，导电PC，加纤防火PC，抗紫外线耐候PC，食品级PC，抗化学性PC。

主要优点

1、具高强度及弹性系数、高冲击强度、使用温度范围广;

2、高度透明性及自由染色性;

3、成形收缩率低、尺寸安定性良好。

4、耐疲劳性佳;

5、耐候性佳;

6、电气特性优;

7、无味无臭对人体无害符合卫生安全[4]

PC（聚碳酸酯） 台湾奇美 PC-122U

PC（聚碳酸酯） 台湾奇美 PC-6600

PC（聚碳酸酯） 台湾奇美 PC-6610

PC（聚碳酸酯） 台湾奇美 PC-6700

 Huayun Plastic Company Main Performance A, mechanical properties: High Strength, fatigue resistance, dimensional stability, creep is also small (high temperature conditions also rarely changed) ; B, Heat aging: After strengthening the UL temperature index to 120 ~ 140 °C (outdoor long-term aging is also very good) ; C, Solvent Resistance: No stress cracking; D, water stability: easy to decompose in water (high temperature, high humidity environment use caution) ; E, electrical performance: 1, INSULATION PERFORMANCE: Excellent (moisture, high temperature can also maintain electrical performance stability, is the manufacture of electronic, electrical parts of the ideal material) ; 2, Dielectric Coefficient: 3.0-3.2; 3, Arc Resistance: 120s; F, molding processability: General Equipment injection or extrusion. The mold temperature is lower than that of other engineering plastics due to its high crystallization rate and good fluidity. In the processing of thin-walled products, only a few seconds, on the large parts as long as 40-60 seconds.