耐热级高流动合金料PC/ABS C1200HF沙伯基础(原GE)

耐热级高流动合金料PC/ABS C1200HF沙伯基础(原GE)

供应PC/ABS C1200HF沙伯基础 耐热级高流动

供应PC/ABS C6200沙伯基础 阻燃UV稳定

供应PC/ABS C6600沙伯基础 防火V0级

供应PC/ABS C2800沙伯基础 阻燃V0流动性佳

供应PC/ABS C2950沙伯基础 阻燃V0耐高温

供应PC/ABS C2950HF沙伯基础 阻燃级 高流动

供应PC/ABS C1110-100沙伯基础 高流动 高冲击(本色)

PC/ABS典型应用范围:

  1.汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件

  2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器

  3.电信，移动电话外壳，附件以及智能卡（SIM卡）：

  4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道

  5.家用电器，如洗衣机，吹风机，微波炉内外部件

  PC/ABS注塑模工艺条件:

  干燥处理：加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。

  熔化温度： 230~300C。

  模具温度：50~100C。

  注射压力：取决于塑件。

  注射速度：尽可能地高。

化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右。

PC/ABS 合金材料的特性：

    PC/ABS是由聚碳酸酯(Polycarbonate)和聚丙烯精(ABS)合金而成的热可塑性塑胶，结合了两种材料的优异特性，ABS材料的成型性和PC的机械性、冲击强度和耐温、抗紫外线(UV)等性质。

供应PC/ABS C1110HF-100沙伯基础 高流动 流动改良

供应PC/ABS C1200-701沙伯基础 耐高温

供应PC/ABS C1200HF-701沙伯基础 高流动级 耐高温

供应PC/ABS C1200HF-100沙伯基础 耐高温 流动性改良(本色)

Huayun Plastics company PC / ABS Engineering Plastics that PC + ABS engineering plastics alloy, in the chemical industry, the Chinese name is plastic alloy, so named PC / ABS, the reason is that this material not only has excellent heat and weather resistance, dimensional stability and impact resistance of Pc Resin, but also has excellent processing flowability of ABS resin. Therefore, the application in thin-walled and complex shape products, can maintain its excellent performance, as well as plastic and an Ester of material forming. PC / ABS Resin is a blend of high impact resistance, Amorphous Polycarbonate PC and acrylonitrile-butadiene-styrene terpolymer ABS. Cycoloy can be customized to meet specific performance requirements to achieve a balance of performance, cost, and processability for car body panels and DASHBOARDS, computer casings, and mobile phones. This alloy blend has the following characteristics: low temperature ductility, excellent impact resistance, high temperature resistance and excellent aesthetic.