电镀级PC/ABS|台湾台化|AC2300

电镀级PC/ABS|台湾台化|AC2300

供应： 台湾台化PC/ABS PC/ABS.AC2000主要性能：超高抗冲击性，良好的粘结性，尺寸稳定性良好，热稳定性良好。

 PC/ABS.AC2100主要性能：超高抗冲击性，良好的粘结性，尺寸稳定性良好，热稳定性良好。 

PC/ABS.AC2300重要参数：熔流率：9.0g/10min密度:1.12 g/cm3成型收缩率:0.5 %弯曲强度:78.5 MPa弯曲模量:2550 MPa硬度:110 PC/ABS.AC2400主要性能

PC/ABS典型应用范围:

  1.汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件

  2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器

  3.电信，移动电话外壳，附件以及智能卡（SIM卡）：

  4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道

  5.家用电器，如洗衣机，吹风机，微波炉内外部件

  PC/ABS注塑模工艺条件:

  干燥处理：加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。

  熔化温度： 230~300C。

  模具温度：50~100C。

  注射压力：取决于塑件。

  注射速度：尽可能地高。

化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右。

Properties of PC/ABS alloy from Huayun Plastics Co. , Ltd. : PC/ABS is a thermoplastic plastic made of Polycarbonate and ABS alloys, combining the excellent properties of the two materials, the formability of ABS and PC mechanical properties, impact strength and temperature resistance, UV (UV) and other properties. PC/ABS engineering plastics is called PC + ABS (engineering plastic alloy) . In the chemical industry, the Chinese name is plastic alloy. The reason why it is called PC/ABS is that this material has both excellent heat and weather resistance, dimensional stability and impact resistance of PC resin, also has the ABS resin excellent processing fluidity. Therefore, the application in thin-walled and complex shape products, can maintain its excellent performance, as well as plastic and an Ester of material forming.