GF33%玻纤增强耐高温尼龙料PA66/70G33L/美国杜邦

GF33%玻纤增强耐高温尼龙料PA66/70G33L/美国杜邦

5 用途

PA主要用于：

汽车工业：各种输油管、活塞、绳索、传动皮带，纺织机械工业设备

PA制品电气电子工业,

交通运输业,

机械制造工业：电器线圈、电缆接头各种滚子、滑轮、泵叶轮、风扇叶片、蜗轮、推进器、螺钉、螺母、耐油密封垫片、耐油容器、外壳、软管、电缆护套、剪切机、滑轮套

PA66 FR15   美国杜邦 阻燃纯树脂

产品摘要：纯树脂，防火V-O 特性：UL94 V-0等级

PA66 FR10   美国杜邦 阻燃纯树脂

产品摘要：纯树脂，V-O阻然 特性：UL94 V-0等级

PA66 FR52G30BL 美国杜邦 阻燃增强级

产品摘要：30%玻纤，阻然

特性：30%玻纤增强，阻然

PA66 FE5171 美国杜邦 食品增强级尼龙

产品摘要：玻纤30%，食品级

PA66 70G13L 美国杜邦 玻纤增强级尼龙

产品摘要：高强度，玻纤13%   特性：高强度13%玻纤

PA66 70G13HS1L 美国杜邦 玻纤增强级尼龙

产品摘要：高强度，玻纤13%

PA66 10B40  美国杜邦 矿纤增强级尼龙

产品摘要：特性：40%矿物增强

PA66 70G30L 美国杜邦 玻纤增强级尼龙

产品摘要：高强度，玻纤30%   特性：30%玻纤， 注塑成型；

电线电缆通讯业,

薄膜及日常用品：包装用袋、食品用薄膜（熟食用的高温薄膜和清凉饮料用的低温薄膜）

制造各种轴承,齿轮,圆齿轮、凸轮、伞齿轮、输油管,储油器,保护罩,支撑架,车轮罩盖,导流板,风扇,空气过滤器外壳,散热器水室,制动管,发动机罩,车门把手.轴承、齿轮、滑轮泵叶轮、叶片、高压密封圈、垫、阀座、衬套、输油管、贮油器、绳索、传动带、砂轮胶粘剂、电池箱 牛头刨床滑块 电磁分配阀座、冷陈设备、衬垫、轴承保持架、汽车和拖拉机上零雾料，

Huayun Plastics Company 6 disadvantages of Nylon 1. Water absorption. Water absorption, saturated water can reach more than 3% . To a certain extent, it affects the dimensional stability and electrical properties, especially the thickness of thin-walled parts, and the mechanical strength of plastics will be greatly reduced by water absorption. In the selection of materials, should take into account the use of environmental and other components with the impact of precision. Fiber reinforced resin can reduce the water absorption, so that it can work at high temperature and high humidity. Nylon has a good affinity with glass fiber. It is commonly used in making combs, toothbrushes,

 clothes hooks, fan bones, net bag ropes, fruit outer packaging bags and so on. Non-toxic, but not long-term contact with acid and base. It is worth noting that the tensile strength of Nylon Increases About 2 times and the temperature resistance is improved. 2. Poor light fastness. In a long-term high temperature environment and the oxygen in the air oxidation, first brown color, followed by surface fracture. 3. It is difficult to control the dimensional stability due to the thermal expansion, and the sharp angle in the part will lead to the stress concentration and reduce the mechanical strength If the wall thickness is not uniform, it will cause the distortion and deformation of the parts. 4. Will absorb water, alcohol and swelling, not strong acid and oxidant, can not be used as acid-resistant materials. Oh, Shit