The 371B, the industry leader in high-power curve tracers, performs DC parametric characterization on a wide variety of power semiconductors including thyristors, SCRs, IGBTs and power MOSFETs. The high-voltage collector mode permits testing the Off-Characteristics of a device up to 3,000 volts. The pulsed high-current collector mode provides output current pulses greater than 400 amps peak to test On-Characteristics and permits high-power testing up to 3,000 watts. In the sweep measurement mode, the 371B automatically constructs a family of curves while stimulating the device with low-duty-cycle pulses. With this capability, power curves can be displayed without excessive heating of the device.
Interactive Programmable Control
Interactive control of all 370B and 371B measurements is accomplished from the full-featured front panel or over the GPIB. Every operating parameter can be controlled using the GPIB controller. 370B and 371B Series LabView drivers are available at the web site. These drivers have many of the building blocks to create a custom measurement solution.
Store and Recall Setups and Digitized Curves
Up to 80 digitized characteristic curves can be stored on a diskette or in internal non-volatile memory and recalled at the touch of a button. A live curve can then be compared with a previously stored curve to assess temperature drift or other changes in operating parameters. To help identify the data, up to 24 characters of text may be used to label or annotate the curve data.
Operating parameters can be adjusted, stored and recalled using several storage methods including the 370B and 371B system memory, the built-in 1.44 MB floppy drive, or sent externally via the GPIB controller.
Automated Cursor
The 370B and 371B provide three cursor measurement modes. The dot cursor provides direct screen readout of voltage, current, gm or DC beta at any point. The window cursor can be positioned between two curves to measure small signal beta or gm and can also be used for visual go/no-go tests. The function line cursor provides screen readout of a slope or intercept value.
Sweep Measurement Mode
In the sweep measurement mode, the curve tracer automatically constructs a family of curves. The 371B achieves this with low duty-cycle pulses. With this capability, power curves can be displayed without excessive heating of the device.
Direct Hardcopy Printouts
Curve output data can be sent directly from the 370B and 371B to a Citizen iDP-3240thermal printer. Printing can continue while the 370B and 371B perform the next tasks.
- 深圳市科中科仪器有限公司
- 谭新华 业务部
- 13538174533
- 广东省深圳市福永大道福华大厦9G
为您精选
- 药品温湿度监控系统 医药冷链GSP远程自动数据传输方案博锐BR-WS21机房环境温湿度监控技术W
- 出售/回收 Anritsu安立S810D 天线分析仪
- 二手安捷伦Agilent 86112A 20 GHz 双通道电模块
- 美国安捷伦Agilent 86115D光收发信机测试模块
- 出售 现货 安捷伦Agilent85036B网络分析仪校准件
- 出售 安捷伦U2002A USB接口26.5G功率传感器
- 租售维修Agilent安捷伦 N1912A N1921A功率计 功率探头
- 是德科技 安捷伦Agilent E9301H 功率传感器
- 出售/回收 是德科技Keysight E9300H 功率传感器
- 出售 原装进口探头Agilent安捷伦 U2004A射频功率传感器
- 安捷伦 keysight PA2201A交流功率分析仪
- YOKOGAWA横河WT230 数字功率计