进口电动衬氟蝶阀 德国洛克LOCKE电动衬氟蝶阀

进口电动衬氟蝶阀产品概述：

德国《LOCKE》洛克--进口电动衬氟蝶阀有开关型和调节型二种，衬氟蝶阀与电子式电动执行机构配套，输入控制信号（4～20mADC或1～5VDC）及单相电源即可控制运转，电动衬氟蝶阀具有功能强、体积小、轻便宜人，性能可靠、配套简单、流通能力大。衬四氟电动蝶阀是在过流部件、阀体、蝶板、阀杆上采用衬里技术衬里较厚的高分子材料，防腐蚀性能优良，可适用于任何浓度的酸、碱、盐及氧化剂、还原剂、有机溶剂等介质，电动衬氟蝶阀是化工、石油、医药、食品、钢铁冶炼、造纸、水电等系统的气体、液体、半流体的管路和容器上作截流和调节设备使用的理想产品，并可取代闸阀、截止阀和其它类型的切断、调节阀门。

进口电动衬氟蝶阀用途及特点：

（1）小型轻便，容易拆装及维修，并可在任意位置安装。

（2）结构简单、紧凑，90°回转开启迅速。

（3）操作扭矩小，省力轻巧。

（4）流量特性趋於直线，调节性能好。

（5）密封材料耐老化、耐腐蚀、可适用多种介质。

进口电动衬氟蝶阀性能范围：

公称通经 50～600mm

公称压力 1.0～1.6MPa

适用温度 PTFE:-30～+150℃

  PA:-30～+100℃

连接方式 对夹，法兰

阀结构 A型、LT型

阀体材质 304、316、碳钢、铸铁

阀板材质 304、316、碳钢、铸铁

阀座/衬里 PTFE(F4)、FEP(F46)

适用介质 强酸、强碱、强氧化剂等

Introduction of imported electric fluorine lined butterfly valve products:

There are two types of imported electric fluorine lined butterfly valve: switch type and regulation type. Fluorine lined butterfly valve is matched with electronic electric actuator. It can be controlled by inputting control signal (4 ~ 20mADC or 1 ~ 5VDC) and single-phase power supply. Electric fluorine lined butterfly valve has strong function, small volume, light and pleasant, reliable performance, simple matching and large circulation capacity. PTFE lined electric butterfly valve adopts lining technology on flow passage parts, valve body, butterfly plate and valve stem. It is made of thick polymer material with excellent anti-corrosion performance. It can be applied to any concentration of acid, alkali, salt, oxidant, reducing agent, organic solvent and other media. The electric fluorine lined Butterfly valve is a kind of gas for chemical industry, petroleum, medicine, food, steel smelting, paper making, water and electricity systems It is an ideal product for liquid and semi fluid pipelines and containers as shut-off and regulating equipment, and can replace gate valve, globe valve and other types of shut-off and regulating valves.

Purpose and characteristics of imported electric fluorine lined butterfly valve:

All lined PTFE (F4), poly (trifluoroethylene) (F3) and poly (perfluoroethylene) (F46) fluoroplastic Lined Butterfly valves have the advantages of corrosion resistance, no leakage and long service life. PTFE lined electric butterfly valve is suitable for concentrated sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, aqua regia, various organic acids, strong acids, oxidizing media or high-temperature olefinic sulfuric acid, high-temperature concentrated acetic acid, acid-base alternation and a variety of organic solvents and other strong corrosive media.

(1) Small and light, easy to disassemble and repair, and can be installed in any position.

(2) The structure is simple and compact, and the 90 ° rotation can open quickly.

(3) Small operating torque, labor saving and light.

(4) The flow characteristics tend to be linear and the regulation performance is good.

(5) The sealing material is resistant to aging and corrosion, and can be used in a variety of media.

Performance range of imported electric fluorine lined butterfly valve:

Nominal diameter 50～600mm

Nominal pressure 1.0～1.6MPa

Applicable temperature PTFE:-30～+150℃

PA:-30～+100℃

Connection mode Clamp, flange

Valve structure Type A, lt

body material 304, 316, carbon steel, cast iron

Valve plate material 304, 316, carbon steel, cast iron

Seat / lining PTFE(F4)、FEP(F46)

Applicable medium Strong acid, strong base, strong oxidant, etc