进口电动硬密封蝶阀 德国洛克LOCKE

进口电动硬密封蝶阀产品概述：

德国《LOCKE》洛克--进口电动硬密封蝶阀被广泛用于石油、化工、电力、冶金、食品、医药、轻纺、造纸等行业，可安装在温度≤425℃，介质可为煤气、空气、蒸汽、水、海水、油品等工业管网上作调节流量和切断介质用。电动硬密封蝶阀配以电动执行气，可实现远距离控制和自动化操作。电动多层次金属密封蝶阀系列产品，系长寿命、节能型蝶阀。其结构采用三维编心原理设计，阀座采用硬软密封兼容的多层次结构，加工精湛，工艺先进。本产品由阀体、蝶板、多层次阀座、阀杆、传动机构等主要部件组成。

进口电动硬密封蝶阀产品特点：

1.开启力矩小，灵活方便，省力节能。

2.三维编心结构，使蝶板越关越紧，其密封性能可靠，达到无泄漏。

3.耐高压、耐腐蚀、耐磨损、使用寿命长等。

4.设计合理，结构紧凑，启闭迅速。

5.开启力矩小，密封副无摩擦转动，阀门使用寿命长。

6.更换阀体材质和密封圈复合夹层可适用不同介质。

进口电动硬密封蝶阀性能范围：

型        式 三偏心型

公称通径 80～1000mm

公称压力 PN1.0、1.6MPa

连接型式 对夹式、法兰式（法兰标准：JB/T79.1-94、79.2-94等）

材       料 铸钢（ZG230-450）、铸不锈钢（ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti）等

上  阀  盖 与阀体成一整体

压盖型式 螺栓压紧式

填        料 V型聚四氟乙烯填料、含浸聚四氟乙烯填料、纺织填料、石墨填料

阀芯型式 部分球面型

蝶板材料 铸钢（ZG230-450）、铸不锈钢（ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti）等

额定行程 全开90°

型       式 LTEB电子式电动执行机构

输入信号 4-20mA或1-5V·DC

电源电压 220V/50Hz

环境温度 -25～+70℃

Introduction of imported electric hard seal butterfly valve products:

Locke imported electric hard sealing butterfly valve is widely used in petroleum, chemical, electric power, metallurgy, food, medicine, light textile, paper making and other industries. It can be installed in industrial pipe network with temperature ≤ 425 ℃ and its medium can be gas, air, steam, water, sea water, oil and other industrial pipe network for regulating flow and cutting off medium. Electric hard seal butterfly valve with electric actuator can realize remote control and automatic operation. Electric multi-level metal seal butterfly valve series products, a long life, energy-saving butterfly valve. Its structure adopts three-dimensional core principle design, and the valve seat adopts multi-level structure compatible with hard and soft seal, with exquisite processing and advanced technology. This product is composed of valve body, butterfly plate, multi-level valve seat, valve stem, transmission mechanism and other main parts.

Features of imported electric hard seal butterfly valve:

1. Small opening torque, flexible and convenient, labor saving and energy saving.

2. The three-dimensional core structure makes the butterfly plate tighter and tighter, and its sealing performance is reliable without leakage.

3. High pressure resistance, corrosion resistance, wear resistance, long service life, etc.

4. Reasonable design, compact structure and quick opening and closing.

5. Small opening torque, friction free rotation of sealing pair and long service life of valve.

6. The replacement of valve body material and sealing ring composite interlayer can be applied to different media.

Performance range of imported electric hard seal butterfly valve:

Type Three sided heart type

Nominal diameter 80～1000mm

Nominal pressure PN1.0、1.6MPa

Connection type Clamp type, flange type (flange standard: JB / t79.1-94, 79.2-94, etc.)

Material Science Cast steel (zg230-450), cast stainless steel (zg1cr18ni9ti, zg1cr18ni12mo2ti), etc

Upper valve cover Integral with valve body

Gland type Bolt compression type

Fillers V-type PTFE packing, PTFE impregnated asbestos packing, asbestos textile packing, graphite packing

Valve core type Partial spherical shape

Butterfly plate material Cast steel (zg230-450), cast stainless steel (zg1cr18ni9ti, zg1cr18ni12mo2ti), etc

Rated travel Full open 90 degrees

Type Lteb electronic electric actuator

Input signal 4-20mA or 1-5V · DC

supply voltage 220V/50Hz

ambient temperature - 25～+70℃