进口法兰蒸汽电磁阀 德国洛克法兰蒸汽电磁阀

一、进口法兰蒸汽电磁阀产品详情：

德国《LOCKE》洛克--进口法兰蒸汽电磁阀阀芯均为不锈钢材料,活塞式结构,活塞环用特殊耐温,耐磨材料制作;活塞与金属阀腔不产生直接摩擦,阀体安装方向无限制;特制线圈,不易烧毁;长时间停止动作重新启动,动作同样灵敏。适用于航天、船舶重工、化工、锅炉、采暖设备、干燥设备、食品医疗设备、清洗设备、等加温管道系统中的蒸汽电磁阀产品。

1、 Details of imported flange steam solenoid valve:

The valve cores of imported flange steam solenoid valves are made of stainless steel and piston type structure. The piston rings are made of special temperature resistant and wear-resistant materials; There is no direct friction between piston and metal valve chamber, and the installation direction of valve body is unlimited; Special coil, not easy to burn; Long time stop action restart, action is also sensitive. It is suitable for steam solenoid valve products in aerospace, shipbuilding, chemical industry, boiler, heating equipment, drying equipment, food and medical equipment, cleaning equipment, etc.

二、进口法兰蒸汽电磁阀技术参数：

动作方式：先导型

通径范围：DN15-600mm

工作环境温度：-30—+80℃;-50—+100℃

线圈工作温度：<+50℃、<+85℃

控制方式：常开式、常闭式

国际标准电压：AC(380、220、110、24)V、DC(220、110、24、12)V

流通流体介质：蒸汽、饱和蒸汽等高温气体

流通流体温度：<+120℃、<+200℃、<+350℃

流通流体压力：6bar、16bar、25bar、40bar、64bar

阀体材质：不锈钢(304、316、316L)、铸钢

连接方式：螺纹(内螺纹，外螺纹)法兰、焊接、卡箍、活接

泄漏量：零泄漏

2、 Technical parameters of imported flange steam solenoid valve:

Action mode: pilot type

Diameter range: DN 15-600 mm

Working environment temperature: - 30 - + 80 ℃- 50—+100℃

Coil working temperature: < + 50 ℃ and < + 85 ℃

Control mode: normally open and normally closed

International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V

Circulating fluid medium: steam, saturated steam and other high temperature gas

Circulating fluid temperature: < + 120 ℃, < + 200 ℃, < + 350 ℃

Circulating fluid pressure: 6bar, 16bar, 25bar, 40bar, 64bar

Valve body material: stainless steel (304, 316, 316L), cast steel

Connection mode: threaded (internal thread, external thread) flange, welding, clamp, union

Leakage: zero leakage

三、进口法兰蒸汽电磁阀工作原理：

常闭：当线圈通电时，电磁铁芯吸合，卸压孔打开，主活塞由介质压力推动，打开主阀口，介质流通；

当线圈断电时，主阀口关闭，介质截止。

常开：当线圈通电时，电磁铁芯吸合，卸压孔关闭，主活塞由介质压力推动，关闭主阀口，介质截止；

当线圈断电时，主阀口打开，介质流通。

3、 Working principle of inlet flange steam solenoid valve:

Normally closed: when the coil is energized, the electromagnet core is closed, the pressure relief hole is opened, the main piston is pushed by the medium pressure, the main valve port is opened, and the medium flows;

When the coil is powered off, the main valve port is closed and the medium is cut off.

Normally open: when the coil is energized, the electromagnet core is closed, the pressure relief hole is closed, the main piston is pushed by the medium pressure, the main valve port is closed, and the medium is cut off;

When the coil is powered off, the main valve port opens and the medium flows.

四、进口法兰蒸汽电磁阀性能特点：

1、耐腐：主要部件阀塞，阀体等采用不锈钢和铸钢制成，防腐性能良好；

2、耐磨：选材合理，阀塞与阀体间巧妙地利用流体的润滑作用，减少磨损；

3、耐热：电磁、密封部分全部采用特种耐高温电工材料和密封材料，并采用了有效的隔热措施。

4、 Performance characteristics of imported flange steam solenoid valve:

1. Corrosion resistance: the main parts such as valve plug and valve body are made of stainless steel and cast steel with good corrosion resistance;

2. Wear resistance: reasonable material selection, skillful use of fluid lubrication between valve plug and valve body to reduce wear;

3. Heat resistant: the electromagnetic and sealing parts are all made of special high temperature resistant electrical materials and sealing materials, and effective heat insulation measures are adopted.