手机网站
老板,欢迎来到搜好货![请登录][免费注册]

进口气体电磁阀 德国洛克气体电磁阀

电磁阀产品德国洛克LOCKE进口气体电磁阀,欢迎选购!

价加格
¥2350
¥2200
起订量
1-49台
≥50台
规格
DN10~50
¥2350.00/台 200台可售
立即询价 查看联系方式
获取最低报价
商家收到后会立即联系您
请阅读并同意隐私政策
进入手机版
品牌 :
德国洛克
型号 :
LOCKE
材质 :
不锈钢
类型(通道位置) :
先导式
连接形式 :
法兰
适用介质 :
水
流动方向 :
双向
用途 :
截止
公称通径 :
DN10~50
工作温度 :
-10~+80℃
使用压力 :
0~160Mpa
产品详情
Product details

一、进口气体电磁阀产品概述:

德国《LOCKE》洛克--进口气体电磁阀(Gas solenoid valve )是用电磁控制的工业设备,用在工业控制系流中调整介质的方向,流量,速度和其它的参数。电磁阀是用电磁阀的效应进行控制,主要的控制方式由继电器控制。这样电磁阀可以配合不同电路来实现预期的控制,而控制的精度和灵活性都能够保证。电磁阀有很多种,不同的电磁阀在控制系统的不同位置发挥作 用,较常用的是单向阀,安全阀,方向控制阀,速度调节阀等等。 


1、 Overview of imported gas solenoid valve products:


German "LOCKE" Rock -- Gas solenoid valve (imported solenoid valve) is an electromagnetic controlled industrial equipment, which is used to adjust the direction, flow, speed and other parameters of the medium in the industrial control system. Solenoid valve is controlled by the effect of solenoid valve, and the main control mode is controlled by relay. In this way, the solenoid valve can cooperate with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed. There are many kinds of solenoid valves, different solenoid valves play a role in different positions of the control system, the more commonly used are one-way valve, safety valve, direction control valve, speed control valve and so on.

二、进口气体电磁阀技术参数:

公称通径:DN10~50mm

原理结构:直动活塞式

环境温度:-10~+50℃ -40~+80℃

线圈温度:<+50℃、<+85℃

控制方式:常闭、常开、自保持

公称压力:0~1.6Mpa

阀体材质:铸钢、不锈钢304、316

适用介质:气、水、油、蒸汽、燃气、腐蚀性流体

介质温度:-5℃~180℃

介质粘度:小于50CSt (大于50时需定制)

防护性能:防水、防尘、防爆(Exd IICT5)、防腐

阀芯材质:均为不锈钢

接线方式:接线座式、引线式、插头式

电源电压:DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V;

                AC24V、AC36、AC110V、AC127V、AC220V、AC380V

连接方式:法兰、内螺纹、外螺纹、卡套、焊接

 泄 漏 量:零泄漏

备      注:特殊型可定制


2、 Technical parameters of imported gas solenoid valve:


Nominal diameter: DN 10 ~ 50mm


Principle and structure: direct acting piston type


Ambient temperature: - 10 ~ + 50 ℃ - 40 ~ + 80 ℃


Coil temperature: < + 50 ℃ and < + 85 ℃


Control mode: normally closed, normally open, self holding


Nominal pressure: 0 ~ 1.6Mpa


Valve body material: cast steel, stainless steel 304, 316


Applicable media: gas, water, oil, steam, gas, corrosive fluid


Medium temperature: - 5 ℃~ 180 ℃


Medium viscosity: less than 50cst (customized when more than 50)


Protection performance: waterproof, dustproof, explosion-proof (Exd iict5), anti-corrosion


Valve core material: stainless steel


Wiring mode: wiring base type, lead type, plug type


Power supply voltage: DC12, DC24 V, dc36 V, dc110 V, dc127 V, DC220 V, dc380 V;


AC24V、AC36、AC110V、AC127V、AC220V、AC380V


Connection mode: flange, internal thread, external thread, ferrule, welding


Leakage: zero leakage


Note: special type can be customized


三、进口气体电磁阀工作原理:

常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。

当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。

常开:当线圈通电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。

当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。


3、 Working principle of inlet gas solenoid valve:


Normally closed: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.


When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.


Normally open: when the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.


When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.


四、进口气体电磁阀产品特点:

进口气体电磁阀零压力亦能打开主阀,低压差,流量大,适用范围广,阀芯密封能自动补偿,提高阀的寿命与可靠性,特殊场合可持续长时间通电。


4、 Features of imported gas solenoid valve:


The imported gas solenoid valve can also open the main valve with zero pressure, low pressure difference, large flow and wide application range. The valve core seal can automatically compensate, improve the service life and reliability of the valve, and can be continuously electrified for a long time in special occasions.

搜好货供应商上海衡意流体控制有限公司供应进口气体电磁阀 德国洛克气体电磁阀,为您提供详细的产品报价、参数、图片等商品信息,如需进一步了解进口气体电磁阀 德国洛克气体电磁阀,请与厂家直接联系,请在联系时说明是在搜好货网看到这条商机的。
上海衡意流体控制有限公司
进入店铺首页 → 上海衡意流体控制有限公司

上海衡意流体控制有限公司创建于2016年位于有“东方巴黎”的美称,中国的经济、金融中心,繁荣的国际大都市上海市,专业代理销售德国LOCKE洛克系列产品。秉承以客户为中心的服务理念,用心去感受客户需求。为客户提供最好的产品、健全的售后服务以及真诚的态度均得到新老客户的一致好评。公司组织机构健全且拥有一批经验丰富、高素质、高效率的员工队伍,如果您对我公司的产品服务有兴趣,请在线留言或者来电咨询。 上海衡意公司为石油、化工、冶金、轻工、电站、城建供水及输油、输气、然气、长输管线等工程,为您提供专业的蒸汽阀门,不锈钢阀门,水用阀门,低温阀门,卫生级阀门,铸钢阀门,美标阀门,电厂阀门、高中压球阀、蝶阀、闸阀、减压阀、电磁阀、针型阀、调节阀、安全阀、隔膜阀、排气阀、疏水阀、截止阀、止回阀、阻火器、平衡阀、水力控制阀、电站阀、多级泵、消防泵、高温泵、隔膜泵、卫生泵、离心泵、真空泵、屏蔽泵、管道泵、化工泵、排污泵、转子泵、计量泵以及引进装置配套的非标和特殊阀门八大类、1000余个品种规格。 上海衡意公司不仅注重泵、阀产品销售,还会根据具体的使用环境,为客户提供最好的泵、阀解决方案。通过泵、阀产品的应用,衡意流体控制旨在帮助客户达成节能、环保、高效、安全的宗旨和目标。

查看更多 >
公司名称上海衡意流体控制有限公司
公司类型有限责任公司(自然人投资或控股)
经营模式生产厂家
成立日期2016-07-27
经营地址上海市市辖区岚丰路1150号
主营行业调节阀,电磁阀,减压阀,疏水阀,截止阀,闸阀,球阀,蝶阀,屏蔽泵,转子泵,离心泵,真空泵,泵
主营产品进口调节阀,进口蒸汽调节阀,进口电动调节阀,进口气动调节阀,进口自力式调节阀
本页信息来源于用户商铺提交,信息真实性、准确性和合法性由信息提供方完整负责,平台对此不承担任何保证责任。 请您在购买时务必认真确认供应商资质和产品质量,过低的价格有可能是虚假信息,请谨慎对待,谨防欺诈行为。 推荐您在采购时,尽量优先选择经过企业认证的采通通 、采神宝 商家。
此进口气体电磁阀 德国洛克气体电磁阀产品由上海衡意流体控制有限公司在2021-06-07T16:40:45更新,主要更新内容为:产品详情,产品促销语,产品起订价,产品起订量,产品类别信息。
立即询价
手机版详情
客服

您使用的浏览器可能存在安全风险

系统检测到您当前使用的是IE内核浏览器,该浏览器将导致您的相册及视频功能无法正常使用! 建议您立即更换浏览器!