进口高压电磁阀 德国洛克高压电磁阀

一、进口高压电磁阀产品概述：

德国《LOCKE》洛克--进口高压电磁阀是指用于高压气体、高压水、液压油品等管道设备上实现自动化控制的电磁阀，一般都采用活塞式结构。广泛应用在航天、船舶重工、石油化工、给排水、消防设备、食品医疗设备、清洗设备、景观喷灌、加湿设备、液压设备、测试设备、水厂等,工作压力在1.6～360MPa的管道系统中。

1、 Overview of imported high pressure solenoid valve products:

Locke imported high pressure solenoid valve is used for automatic control of high pressure gas, high pressure water, hydraulic oil and other pipeline equipment, which generally adopts piston structure. It is widely used in aerospace, shipbuilding industry, petrochemical industry, water supply and drainage, fire fighting equipment, food and medical equipment, cleaning equipment, landscape sprinkler irrigation, humidification equipment, hydraulic equipment, testing equipment, water plant, etc., with working pressure of 1.6 ~ 360MPa.

二、进口高压电磁阀技术参数：

产品规格：DN0.5~DN200

适用压力：0.5～360Mpa

介质温度：-200~+350℃

适用介质：气、水、油、蒸汽、制冷剂、腐蚀性流体

介质粘度：小于50C St（大于时需定制）

防护性能：防水、防爆、防腐

阀门材质：不锈钢

附加功能：手动、止回

控制方式：常闭、常开

电源电压：DC12～127V;  AC36～380V

连接方式：内螺纹、外螺纹、法兰，根据工况要求选择

性能特点 shou创、超高压力、活塞结构、开关自如

应用范围：航天、核工业、船舶重工、石化、电力、能源、城市消防、供气、供水等

密封材质性能：耐温、耐压、耐磨、防腐

泄漏量：零

备注：特殊要求可定制

2、 Technical parameters of imported high pressure solenoid valve:

Product specification: dn0.5 ~ DN200

Applicable pressure: 0.5 ~ 360MPa

Medium temperature: - 200 ~ + 350 ℃

Applicable media: gas, water, oil, steam, refrigerant, corrosive fluid

Medium viscosity: less than 50c st

Protection performance: waterproof, explosion-proof, anti-corrosion

Valve material: stainless steel

Additional functions: manual, check

Control mode: normally closed, normally open

Power supply voltage: DC12 ~ 127V; AC36～380V

Connection mode: internal thread, external thread, flange, according to the requirements of working conditions

Performance features: innovative, ultra-high pressure, piston structure, easy to switch

Application scope: aerospace, military industry, nuclear industry, shipbuilding, petrochemical, electric power, energy, urban fire protection, gas supply, water supply, etc

Sealing material performance: temperature resistance, pressure resistance, wear resistance, corrosion resistance

Leakage: Zero

Note: special requirements can be customized

三、进口高压电磁阀工作原理：

常闭型：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开;当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

常开型：当线圈通电时，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

3、 Working principle of imported high pressure solenoid valve:

Normally closed type: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.

Normally open type: when the coil is energized, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.

四、进口高压电磁阀性能特点：

阀芯均为不锈钢活塞式，活塞环不会被介质中的杂质卡死，动密封性能高,寿命长；活塞与金属阀腔不产生直接摩擦，阀体安装向无限制；专制线圈，不易烧毁；长时间停止动作重新启动，动作同样灵敏；启动工作压力0.1MPa。

4、 Performance characteristics of imported high pressure solenoid valve:

The valve core is stainless steel piston type, the piston ring will not be stuck by the impurities in the medium, the dynamic sealing performance is high, and the service life is long; There is no direct friction between the piston and the metal valve chamber, and the installation direction of the valve body is unlimited; Autocratic coil, not easy to burn; After a long time of stopping and restarting, the action is equally sensitive; The starting working pressure is 0.1MPa.