手机网站
老板,欢迎来到搜好货![请登录][免费注册]

进口超高压电磁阀 德国洛克超高压电磁阀

电磁阀产品德国洛克LOCKE进口超高压电磁阀,欢迎选购!

价加格
¥2350
¥2200
起订量
1-49台
≥50台
规格
DN0.5~200
¥2350.00/台 200台可售
立即询价 查看联系方式
获取最低报价
商家收到后会立即联系您
请阅读并同意隐私政策
进入手机版
品牌 :
德国洛克
型号 :
LOCKE
材质 :
不锈钢
类型(通道位置) :
先导式
连接形式 :
法兰
适用介质 :
水
流动方向 :
双向
用途 :
截止
公称通径 :
DN0.5~200
工作温度 :
-10~+80℃
产品详情
Product details

一、进口超高压电磁阀产品概述:

德国《LOCKE》洛克--进口超高压电磁阀(Ultra high pressure solenoid valve )用于各种中温、高温、常压、高压场合,适用与中高温热水、导热油、高温蒸汽、饱和蒸汽及过热蒸汽等管路的自动控制;航天、船舶重工、核工业、石化、电力、化学、轻工、机械、科研、给排水、消防、清洗设备、喷泉、管道介质自动化控制等领域。是自动化控制工程、项目改造及设备配套的选择产品。


1、 Overview of imported ultra high pressure solenoid valve products:


German "Locke" - imported ultra high pressure solenoid valve is used in all kinds of medium temperature, high temperature, normal pressure and high pressure occasions. It is suitable for automatic control of medium and high temperature hot water, heat transfer oil, high temperature steam, saturated steam and superheated steam pipelines; Military industry, aerospace, shipbuilding, nuclear industry, petrochemical, electric power, chemistry, light industry, machinery, scientific research, water supply and drainage, fire fighting, cleaning equipment, fountain, pipeline medium automation control and other fields. It is the choice product of automation control engineering, project transformation and equipment matching.

二、进口超高压电磁阀技术参数:

公称通径:DN1~DN300

压力范围:0~300MPa

温度范围:-196℃~+650℃

阀体材质:304不锈钢、316、316L

控制方式:常开、常闭、自保持式

电源电压: DC 12~220V、AC24~380V

适用介质:水、气、油、腐蚀性液体或气体等

防护性能:防尘,防水,防爆(ExdIICT5,ExdIICT6)根据工况选择

接线方式:接线座式;引线式

连接方式:法兰,焊接,内螺纹,外螺纹(特殊接口可定做)

介质粘度:小于50C St(大于时需定制)


2、 Technical parameters of imported ultra high pressure solenoid valve:


Nominal diameter: DN 1 ~ DN 300


Pressure range: 0 ~ 300mpa


Temperature range: - 196 ℃ ~ + 650 ℃


Valve body material: 304 stainless steel, 316, 316L


Control mode: normally open, normally closed, self holding


Power supply voltage: DC 12 ~ 220 V, AC24 ~ 380 V


Applicable media: water, gas, oil, corrosive liquid or gas, etc


Protection performance: dustproof, waterproof, explosion-proof (exdiict5, exdiict6) according to the working conditions


Wiring mode: wiring base type; Wire type


Connection mode: flange, welding, internal thread, external thread (special interface can be customized)


Medium viscosity: less than 50c st


三、进口超高压电磁阀工作原理:

常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开;当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。

常开:当线圈通电时,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。


3、 Working principle of imported ultra high pressure solenoid valve:


Normally closed: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.


Normally open: when the coil is energized, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.


四、进口超高压电磁阀性能特点:

1、独特设计,超高压力、活塞结构、开关自如;

2、先导式活塞结构、性能稳定;密封性好、开关迅速;

3、专制线圈、不易烧毁;线圈功耗小、寿命超长


4、 Performance characteristics of imported ultra-high pressure solenoid valve:


1. Unique design, super high pressure, piston structure, switch freely;


2. The pilot piston has stable structure and performance; Good sealing and quick switching;


3. It is easy to burn; Low power consumption and long life of coil


INTRODUCTION OF IMPORTED ULTRA-HIGH PRESSURE SOLENOID VALVE PRODUCTS: Roch imported Ultra-high pressure solenoid valve for all kinds of medium temperature, high temperature, atmospheric pressure, high pressure occasions, it is suitable for automatic control of middle-high temperature hot water, heat conducting oil, high temperature steam, saturated steam and superheated steam Military Industry, aerospace, ship heavy industry, nuclear industry, petrochemical industry, electric power, chemistry, light industry, machinery, scientific research, water supply and drainage, fire fighting, cleaning equipment, fountains, pipe medium automation control and other fields. Is the Automation Control Project, the project transformation and the equipment matching choice product. 2. Imported UHV SOLENOID valve technical parameters: NOMINAL DIAMETER: DN1 ~ DN300 PRESSURE RANGE: 0 ~ 300MPa temperature range:-196 °c ~ + 650 °C valve body material: 304 stainless steel, 316,316L control mode: Normally Open, normally closed, self-maintaining power supply voltage: DC 12 ~ 220V, AC24 ~ 380V applicable medium: water, gas, oil, corrosive liquid or gas, etc. Protection Performance: dustproof, waterproof, explosion-proof (ExdIICT5, ExdIICT6) according to the operating mode of the choice of wiring: Wiring seat type; lead type connection: Farlane, welding, internal thread, external Thread (special interface can be customized) medium viscosity: less than 50C St (more than custom)3, imported ultra-high Voltage solenoid valve working principle: normally closed: when the coil power, the pilot Spool Suction, pilot hole open, relief pressure on the valve cavity, when the coil is cut off, the pilot Spool is reset by the spring, the pilot hole is closed, the valve upper chamber is pressurized by the Piston throttle hole and the thrust of the reset spring, the solenoid valve is closed. Normally Open: When the coil is energized, the pilot hole is closed, the valve upper chamber is pressurized by the Piston throttle hole and the thrust of the reset spring, the solenoid valve is closed. When the coil is cut off, the pilot Spool is reset by spring, the pilot hole is opened, the upper chamber of the valve is unloaded, the Piston is driven by the lower chamber medium pressure, and the solenoid valve is opened. 4, Imported ultra-high pressure solenoid valve performance features: 1, unique design, ultra-high pressure, Piston structure, switch freely; 2, Pilot Piston structure, stable performance; good sealing, quick switch; 3, Autocratic Coil, not easy to burn down; Coil power consumption is small, life is very long

搜好货供应商上海衡意流体控制有限公司供应进口超高压电磁阀 德国洛克超高压电磁阀,为您提供详细的产品报价、参数、图片等商品信息,如需进一步了解进口超高压电磁阀 德国洛克超高压电磁阀,请与厂家直接联系,请在联系时说明是在搜好货网看到这条商机的。
上海衡意流体控制有限公司
进入店铺首页 → 上海衡意流体控制有限公司

上海衡意流体控制有限公司创建于2016年位于有“东方巴黎”的美称,中国的经济、金融中心,繁荣的国际大都市上海市,专业代理销售德国LOCKE洛克系列产品。秉承以客户为中心的服务理念,用心去感受客户需求。为客户提供最好的产品、健全的售后服务以及真诚的态度均得到新老客户的一致好评。公司组织机构健全且拥有一批经验丰富、高素质、高效率的员工队伍,如果您对我公司的产品服务有兴趣,请在线留言或者来电咨询。 上海衡意公司为石油、化工、冶金、轻工、电站、城建供水及输油、输气、然气、长输管线等工程,为您提供专业的蒸汽阀门,不锈钢阀门,水用阀门,低温阀门,卫生级阀门,铸钢阀门,美标阀门,电厂阀门、高中压球阀、蝶阀、闸阀、减压阀、电磁阀、针型阀、调节阀、安全阀、隔膜阀、排气阀、疏水阀、截止阀、止回阀、阻火器、平衡阀、水力控制阀、电站阀、多级泵、消防泵、高温泵、隔膜泵、卫生泵、离心泵、真空泵、屏蔽泵、管道泵、化工泵、排污泵、转子泵、计量泵以及引进装置配套的非标和特殊阀门八大类、1000余个品种规格。 上海衡意公司不仅注重泵、阀产品销售,还会根据具体的使用环境,为客户提供最好的泵、阀解决方案。通过泵、阀产品的应用,衡意流体控制旨在帮助客户达成节能、环保、高效、安全的宗旨和目标。

查看更多 >
公司名称上海衡意流体控制有限公司
公司类型有限责任公司(自然人投资或控股)
经营模式生产厂家
成立日期2016-07-27
经营地址上海市市辖区岚丰路1150号
主营行业调节阀,电磁阀,减压阀,疏水阀,截止阀,闸阀,球阀,蝶阀,屏蔽泵,转子泵,离心泵,真空泵,泵
主营产品进口调节阀,进口蒸汽调节阀,进口电动调节阀,进口气动调节阀,进口自力式调节阀
本页信息来源于用户商铺提交,信息真实性、准确性和合法性由信息提供方完整负责,平台对此不承担任何保证责任。 请您在购买时务必认真确认供应商资质和产品质量,过低的价格有可能是虚假信息,请谨慎对待,谨防欺诈行为。 推荐您在采购时,尽量优先选择经过企业认证的采通通 、采神宝 商家。
此进口超高压电磁阀 德国洛克超高压电磁阀产品由上海衡意流体控制有限公司在2021-06-05T10:12:04更新,主要更新内容为:产品类别,联系方式,产品参数,产品价格,产品图片信息。
立即询价
手机版详情
客服

您使用的浏览器可能存在安全风险

系统检测到您当前使用的是IE内核浏览器,该浏览器将导致您的相册及视频功能无法正常使用! 建议您立即更换浏览器!