加工定制 : |
否 |
种类 : |
各种炼钢电炉 |
适用对象 : |
钢 铁 |
冶炼工艺 : |
炉外精炼钢及球墨铸铁 |
作业方式 : |
熔炼 |
品牌 : |
鑫磊 |
型号 : |
WX系列 |
用途 : |
精炼 |
外形尺寸 : |
1100*950*1300 |
巩义市鑫磊冶金设备有限公司是生产制造冶金设备及炉外精炼设备的专业厂家,设备精良,技术力量雄厚。主要产品WX系列喂线机/喂丝机,JBWX-5结晶器喂线机/喂丝机,喷补机,挡渣机等系列冶金设备。公司始终坚持依靠科技先进技术,不断开拓进取,深受用户好评。 一次愉快的合作 一生真诚的朋友
该设备是一个双流喂丝机,能够同时将两卷相同或不同的丝线喂入钢包中。喂丝机装备有双套夹送辊及中间导辊支撑。通过上辊借助于一个气缸施加压力。底辊由电机直接驱动。上辊驱动一个编码器来精确地测量出喂入芯线的长充。在控制台上的转换开关允许操作者选择两流同时或相继运行。喂丝速度由控制器来确定,并且将显示在控制台上。该装置监视每流所喂入的长度。达到预先选定的长度则喂丝机自动停止。为了便于安装/拆卸包芯线,该喂丝机具有前进/后退的移动能力。
设备型式:固定、行走、旋转等三种。
设备种类:单线、双线、四线等三种。
设备配置:高端(S7--300)、中端(S7--200)、低端(继电器),三种型式。
The device is a double current wire feeder that can feed two same or different rolls of wire into the ladle at the same time.
The wire feeder device owns double sets of pinch roll and middle guide roll to support,by the upper roll with a cylinder to exert pressure.The lower roll is directly driven by electrical machine.The upper roll accurately measures the length of the feeding core wire by driving a encoder.
The transform switch on the console allows the operator to choose the double current to function at the same time or continuously.
The feeding speed is controlled by the controller,and is shown on the console.The device supervises the feeding length of each current,and it will stop automatically if the length reaches the former setting one.
In order to assemble/disassemble conveniently,the wire feeder has the ability to move forward/backward.
Device pattern:fixed,moving,and rotary
Device category:single wire,double wires,and four wires.
Device assignment:high end(S7--300),middle end(S7--200),low end (relay)
主要技术参数: | Main technical parameters: |
喂线种类:合金芯线、铝线、矩形线Feeding wire category:alloy core wire,aluminum wire,and rectangle wire喂线根数:2根Feeding wire number:2喂线直径:Ф8--Ф20mmFeeding wire diameter: Ф8--Ф20mm喂线速度:1--12米/秒Feeding speed:1--12m/s主机行走速度:14米/分Mainframe moving speed:14m/s导线管角度:30度Conduit angle:30 degrees电机密封:IP55Electrical machine seal:IP55控制面板密封:IP54Control panel seal:IP54轮距:680mmTread:680mm配用功率:主电机7.5KW×2台Equipped power:Main electrical machin 7.5kw×2采用电源:380V 三相四线制Adopted power supply:380v the system of 3phases 4wires主机外形尺寸:1000×1000×1200(mm)(双线固定式)Mainframe appearance size: 1000×1000×1200(mm)(doule wires fixed type)行走钢轨:11kg/m 轻轨Moving rail:11kg/m light rail操作模式:采用PLC控制,可实现机旁、全自动及远程操作Operation pattern:PLC is adopted to control.Operation near the machine,completely automatic control and control is realized. |
为您精选
发送询价单
您对该公司的咨询信息已成功提交,请注意接听供应商电话。
联系人信息
请输入您的称呼
请输入正确的联系方式
请选择咨询问题
请输入正确的图形验证码
商家已收到您的消息,请注意接听供应商的来电~
确保商家能在第一时间与您取得联系
请留下您的联系方式
请输入正确的联系电话
请输入称呼或公司名称
请输入验证码