保温材料粘结强度拉拔仪是根据市场要求而量身研制的高精度粘结强度检测仪，用于现场检测外墙饰面砖、外墙外保温材料、油漆、涂料的粘结强度，采用我公司新开发的智能数字峰值保持表，小可测得0.001kN的力值，完全满足各种粘结强度的检测需要。

The insulation material bond strength puller is a high-precision bond strength tester developed according to market requirements. It is used to test the bond strength of exterior wall facing bricks, external wall insulation materials, paints and coatings. Company A's newly developed intelligent digital peak hold meter can measure a force value of 0.001kN, which fully meets the testing needs of various bonding strengths.

保温材料粘结强度拉拔仪可连续均匀加荷，手动泵与专用千斤顶连为一体，结构紧凑，经久耐用，采用液晶显示粘结力值，自动准确的记录粘结力值并给予峰值保持，该产品采用高镍-氢充电电池，小巧轻便，总重约3千克，便于现场携带和使用。

The insulation material bond strength puller can be continuously and uniformly loaded. The manual pump is connected with a special jack as a whole. The structure is compact and durable. The liquid crystal display is used to display the adhesion value. This product uses a high-efficiency nickel-hydrogen rechargeable battery, which is small and light, and weighs about 3 kilograms. It is easy to carry and use on site.

保温材料粘结强度拉拔仪适用标准： 

JGJ110-97《建筑工程饰面砖粘接强度检验标准》

JGJ126-2000《外墙饰面砖工程施工及验收规程》

JGJ144-2004《外墙外保温工程技术规程》

JG158-2004《胶粉聚苯颗粒外墙外保温系统》

JG149-2003《膨胀聚苯板薄抹灰外墙外保温系统》

使用标准块的规格为95mm×45mm×8mm和40mm×40mm×8mm，保温材料标准试块的规格为100mm×100mm×8mm，  在满足合格要求时的小拉力为0.64kN，A大拉力为2.56kN，针对饰面砖粘结强度低和粘结力小的特点，专将大拉力设计6.00kN，以确保仪器的检测精度。

Applicable standards for bond strength drawing instrument of insulation material:

JGJ110-97 "Test Standard for Bonding Strength of Facing Bricks in Construction Engineering"

JGJ126-2000 "Code for Construction and Acceptance of Exterior Wall Facing Bricks"

JGJ144-2004 "Technical Regulations for External Thermal Insulation Engineering"

JG158-2004 "Plastic powder polystyrene particles for external wall exterior insulation system"

JG149-2003 "Exfoliated polystyrene board thin plaster external wall exterior insulation system"

The standard block specifications are 95mm × 45mm × 8mm and 40mm × 40mm × 8mm. The standard test block specifications of insulation material are 100mm × 100mm × 8mm. The small tensile force is 0.64kN and the large tensile force is 2.56kN when it meets the requirements. In view of the low bonding strength and small bonding force of the facing bricks, the large tensile force is specifically designed to 6.00kN to ensure the detection accuracy of the instrument.

保温材料粘结强度拉拔仪主要参数：

★检测仪器大拉力值：6000N

★活塞行程 ：10mm

★重量 ：3Kg

★精度等级 ：1.0F.S

★分度值 ：0.001KN

★电源 ：9V6F

★工作电流 ： ≤10mA

★关断电源 ：≤ 2m A

Main parameters of insulation material bond strength puller

★ High tensile force of testing instrument: 6000N

★ Piston stroke: 10mm

★ Weight: 3Kg

★ Accuracy grade: 1.0F.S

★ Graduation value: 0.001KN

★ Power supply: 9V6F

★ Working current: ≤10mA

★ Power off: ≤ 2m A

保温材料粘结强度拉拔仪标准块的规格为95mm*45mm 、40mm*40mm两种。为满足监理单位及工程质量监督检验**需求，现有100mm*100mm、和50mm*50mm的标准块和保温钉专用拉拔夹具选择另配，

The specifications of the standard block of the insulation material bond strength puller are 95mm * 45mm and 40mm * 40mm. In order to meet the requirements of the supervision unit and engineering quality supervision and inspection **, the existing 100mm * 100mm and 50mm * 50mm standard blocks and special drawing fixtures for insulation nails are selected separately