不干胶保温钉自粘保温钉不锈钢保温钉空调管道保温钉

自粘式不干胶保温钉碳钢锁片不锈钢保温钉生产厂家鑫捷保温钉

双面胶保温钉的英文简介

Insulation Pin, Fastening for Insulation Can Be either Welded or Non-welded Configurations

·                       Base size: 25 x 25mm/35 x 35mm/40 x 40mm/45 x 45mm/50 x 50mm all are standard

·                       Diameter: 1.70mm for 25 x 25mm base; 2.67mm and 3.00mm for both 35mm or 50mm base are standard. Other sizes available by special order only.

·                       Length: 20mm to 150 mm are standard. Other lengths available by special order.

·                       Material:1.70mm pin is aluminum; 2.67mm and 3.00mm pin are low carbon steel. Also available by special order in all stainless steel or all aluminum

·                       Plating: galvanized costing is standard. yellow, white and blue gal are available

·                       Washers: self-locking washers are available in a variety of sizes, shapes and materials

·                       Recommended assembly method:

o                                    Operation at ambient temperatures between 15 and 25 degrees Celsius

o                                    Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter

o                                    Remove the protective release paper taking care not to touch the adhesive

o                                    Place the hanger in the required position and press the base against the surface to be insulated

o                                    Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours

Insulation Nails: 

Base size: 

1"x1" & 2"x 2" & 1 3/8"x1 3/8"; 

Pin dia.:1.70mm & 2.67mm & 3.0mm; 

Self-adhesive & non-adhesive

Insulation Pins Features:

1) Available material: Aluminum or steel 

2) Use: exclusively used for fixing adiabatic materials in ducts of 

air-conditioner, for glass-wool and rock-wool in soundproofing works, 

and for the duct-lining

3) Self-adhesive type and non-stick type

4) Size: base 25mm / 50mm; pin dia.: 1.70mm/2.70mm/3.00mm

Self Adhesive pins

BASE SIZE:

25x25mm /35x35mm /40x40mm /45x45mm /50x50mm all are standard