佛山顺德南海中山100KG200KG500KG五金电线伺服拉力试验机优惠广泛用于各类五金、金属、橡胶料、鞋类、皮革、服装、纺织、建材、绝缘体、电线、电缆、端子等各类材料。测试其拉伸、撕裂、剥离、抗压、弯曲、抗剪切、三点抗折、四点抗折等各类物理性测试。

※The machine can performs elongation, tear strength, peeling force, resistance, bending force, shearing, Constant load,Constant stroke, three-point bending, four-point bending of metal,non-metal,and compound material. It is used to analyze and test materials in following industries: hardware, metal, plastic, rubber, footwear,leather, garment, textile, building material ,nonconductor, wire&cable, terminal and so on.

※WINDOWS系统，可无限量扩充测试条件参数或测试结果报告参数。

※实时显示测试曲线，并对测得的数据进行存储分析，打印报告曲线。

※具有灵活多变的界面及控制方式，可以绘制多种特殊曲线。

※使用者可自行设定实验之报告格式及报告内容，信号读取速度500次/秒。

※高质感高强度铝合金挤制成型螺杆罩，轻巧流线，明亮大方，华贵无比。

※高工艺加工线条机箱，利落的机件，表面喷砂电镀或冷色烤漆等高级处理，凝聚出高雅，精致价值感。

※标准化夹具连接套，规格标准化，更换各式夹具方便快捷。

※高性能伺服马达和专用变速箱具抗热、低音、防震之效果，及高速高频率的定位功能，搭配时规皮带，提供高精度，低噪音的转动组合保证十万次无漂移，具有多种保护方式，可使试验运行安全可靠。

※操作简单飞梭调速，在荷重范围内，可快速操控，实现多种夹具位移定速。

※高稳定度无间隙、无磨损滚珠螺杆，可消除噪音及机台共振：配合时规皮带轮，确保横杆位移水平度及试件受力均匀度。

※高精度采用高精度轮辐式传感器,重复性误差（再采性）0.01%，温度自动补偿-10℃～+40℃，安全系数120%， 超载150%。

※自动化荷重自动归零、换挡及校正，破断点自动检出，横挡自动回位，曲线自动显示，横挡位移自动测量。

高智能图形操控界面，功能完整，500次/秒数据采样频率，自动记忆，分析测试过程中之资料，对检测能做记忆与结论。

※The testing software of Windows operating system has luxury interface.Some Mechanical values can be set,including speed, displacement,load and loading rate, stress and rate of stressing, strain and rate of straining, stressing rate→straining rate.Many kinds of phase transformation control menu can be combined freely into infinite variety of multistage control mode,such as displacement ≥&≤，load ≥&≤, yield point,break point ratio, stress≥&≤, strain≥&≤，circulation and nested loop control, etc. It can also unlimited expand testing parameters or testing results.

※Real-time display of testing curve,to save and analyze the measured data,  and then print reported curve.

※Standard clamp connecting sleeve with standard specification, which is convenient to  replace clamps.

※The tester is heat-proof,bass and shock resistant with high performance servo motor and special gearbox .It is also process of high speed and high frequency positioning.With timing belt, providing high accuracy and low-noise rotation portfolio guarantees 100,000 times without drift,which can make the  operation safe and reliable with various ways of protection.

※High-precision spoke sensor, repeatability error (readopted) 0.01%, automatic temperature compensation - 10℃～+ 40℃, the safety coefficient is 120%, and 150% ultimate overload.

依据标准：

佛山顺德南海中山100KG200KG500KG五金电线伺服拉力试验机优惠本试验机根据《电子式万能试验机》GB/T 16491-2008标准制造。

本试验机根据GB/T12160-2002《单轴试验用引伸计的规定》和GB/T16825-2008《拉力试验机的检验》进行检定和验收。

This machine was manufactured according to the  GB/T 16491-2008 Standard.

This machine was checked and accepted according to the GB/T12160-2002 and GB/T16825-2008  Standard.

电脑控制伺服万能材料试验机100-2000kg量程

详细技术参数：

电脑控制伺服万能材料试验机3T 5T量程

详细技术参数：