广东热熔胶涂布机、小型实验室涂布机、自动型实验室涂布机

为高精度模组化涂布站机构组合装配，可连续式涂布打样或小量生产的实验室迷你型热熔胶涂布贴合机。可以将热熔压敏胶直接涂布于耐热基材，或涂布于离型纸上再将胶膜转图贴合于个中国不同面材上，如纸张、塑料模型金属膜等。  

连续式热熔胶涂布贴合实验机性能特点  

·全机为高精度模组化涂布站结构组合装配。 

·以百分表为分度头做微调上下胶轮涂布间隙来控制涂布厚度。低上胶厚度为0.01mm。厚度设定后，可以间接锁定胶轮，防止间隙改变。  

·大涂布宽幅为280mm。徒步宽幅以胶槽内两片Teflon挡板来调整。可以无限长度涂布上胶，自动收卷。  

·正反转无级变速，好涂布速度：4.5m/min  

·放料卷轴可调整旋钮改变张力放料。  

·收料卷轴可调整机械式张力控制收取。  

·加温棒，上胶轮与胶槽可以从机体快速拆卸分离来清除残胶。  

·机台尺寸：1150 * 518 (含电机为720) * 658 mm (长*宽*高)  

·机台重量：约120 kg  

·机台电源： AC 220 V (单相)/50Hz  

·机台功率： 1050 w 

Manual glue gun glass glue gun silicone heat Hu glue / glass glue coating experiment machine

For the high precision modular coating station mechanism assembly, can be used for continuous coating proofing or small production of laboratory Mini hot melt adhesive coating machine. Hot melt pressure sensitive adhesive can be directly coated on the heat resistant substrate, or coated on the release of the paper and then transferred to the plastic film on the surface of a different Chinese material, such as paper, plastic models, such as metal film.

Performance characteristics of continuous hot melt adhesive coating and laminating machine

The whole machine is a high precision modular coating station structure assembly.

The dial indicator as dividing head accurately on wheel trimming to control the coating thickness of the coating gap. The lowest glue thickness is 0.01mm. Thickness set, you can directly lock the rubber wheel to prevent the gap change.

Max coating width of 280mm. Foot width to two Teflon glue slot to adjust. Can be coated with unlimited length, automatic winding.

Positive and reverse stepless speed change, the best coating speed: 4.5m/min

The discharge reel can be adjusted to change the tension release.

Receiving reel can be adjusted by mechanical tension control.

Heating rod, rubber wheel and rubber trough can be quickly removed from the body to remove residual rubber.

* machine size: 1150 * 518 (including motor is 720) * mm (L * w * h)

Machine weight: about 120 kg

Machine power: AC 220 V (Dan Xiang) /50Hz

Machine power: 1050 w