连续式热熔胶涂布贴合实验机 为高精度模组化涂布站机构组合装配，可连续式涂布打样或小量生产的实验室迷你型热熔胶涂布贴合机。可以将热熔压敏胶直接涂布于耐热基材，或涂布于离型纸上再将胶膜转图贴合于个中国不同面材上，如纸张、塑料模型金属膜等。 

连续式热熔胶涂布贴合实验机性能特点 

·全机为高精度模组化涂布站结构组合装配。

·高操作温度为250℃ 

·上胶轮与胶槽独立PT-100高精度PID温控模式 

·以百分表为分度头做微调上下胶轮涂布间隙来控制涂布厚度。低上胶厚度为0.01mm。厚度设定后，可以间接锁定胶轮，防止间隙改变。 

·大涂布宽幅为280mm。徒步宽幅以胶槽内两片Teflon挡板来调整。可以无限长度涂布上胶，自动收卷。 

·正反转无级变速，好涂布速度：4.5m/min 

·放料卷轴可调整旋钮改变张力放料。 

·收料卷轴可调整机械式张力控制收取。 

·加温棒，上胶轮与胶槽可以从机体快速拆卸分离来清除残胶。 

·机台尺寸：1150 * 518 (含电机为720) * 658 mm (长*宽*高) 

·机台重量：约120 kg 

·机台电源： AC 220 V (单相)/50Hz 

·机台功率： 1050 w

Continuous hot melt coating laminating machine is a combination of high precision modular coating station assembly, continuous coating, proofing or small amount of laboratory Mini hot melt coating laminating machine. Hot melt pressure sensitive adhesive can be applied directly to heat resistant base material or coated on release paper, and then the adhesive film will be transferred to different surface of China, such as paper, plastic model, metal film, etc..
Performance and characteristics of continuous hot melt coating laminating machine
The whole machine is a modular assembly station with high precision modular coating station.
The maximum operating temperature is 250 centigrade
Rubber and rubber groove independent PT-100 high precision PID temperature control mode
The dial indicator as dividing head accurately on wheel trimming to control the coating thickness of the coating gap. Minimum coating thickness is 0.01mm. Thickness settings, you can indirectly lock the rubber wheel, to prevent gap change.
- Maximum coating width for the 280mm. The width of the hike is adjusted by two Teflon baffles in the rubber tank. Can be unlimited length coating glue, automatic winding.
Positive reverse stepless speed change, the best coating speed: 4.5m/min
• release reel adjustable knob to change tension release.
The reel can be adjusted and mechanical tension control is charged.
A heating bar, the upper rubber wheel and the rubber groove can be quickly disassembled and separated from the body to remove the residual glue.
• machine size: 1150 * 518 (including motor 720) * 658 mm (length * width * height)
Machine weight: about 120 kg
Machine power: AC 220, V (Dan Xiang) /50Hz
• machine power: 1050 w