仪器测量原理Measurement Principle

该仪器为直角坐标测量法，触针接触式。X轴采用高精密的摩擦导轨为基准，Z1轴采用数字传感器，测绘出被测零件的表面轮廓形状的坐标点，通过计算机的软件对传感器采集的原始数据进行数学运算处理，标注所需的测量项目。

● Cartesian coordinates, stylus contacts.

● High precision air floating guide rail –As the measuring datum of X coordinate to guarantee the linear moving accuracy in X direction.

● High precision digital sensor – to get signal of Z coordinate for measuring the profile of various precise mechanical piece part.

● Computer and windows-based MMD measuring program to process the measuring data,  easy for printing and filing

测量功能Main Function

尺寸：包含水平距离、垂直距离、线性距离、半径、直径

夹角：包含水平角、垂直角、夹角

位置公差：包含平行度、垂直度

形状公差：包含直线度、凸度、圆弧轮廓度

辅助生成：包含辅助点、辅助线、辅助圆

Dimension：Contains the horizontal distance, vertical distance, linear distance, radius and diameter

Angle:  Horizontal Angle,  vertical angle,  cross angle

Position tolerance: contains the parallelism and perpendicularity

Form tolerance: contains the straightness, crown, circular arc profile

Auxiliary generation: contains the auxiliary point, auxiliary line, auxiliary circle

技术参数Main Parameters

技术亮点Technical highlights

X轴采用摩擦直线导轨，精度高，寿命长

X-Z1轴采用进口数字式传感器，精度高、线性好

Z1 axis adopts imported digital sensor with high precision and good linearity

简易的测针更换设计，一次安装，无需校正  Simple stylus replacement, one time installation, no need correction

软件支持中英文一键切换  Software supports one-click switching between Chinese and English

支持winXP、win7系统   Support winXP, win7 system

软件标注与CAD标注一样  Software annotation is the same as CAD

圆弧、线自动识别  Automatic Recognition of Arc and Line

支持DXF格式文件导入、导出，定制CAD格式导出

Support DXF format file import and export, customize CAD format export

支持连续标注、基准标注、支持任意插入点

Support for continuous annotation, base annotation, and insert points randomly

支持图形自由旋转及坐标自由旋转  Support graphic and coordinate free rotation

原始数据自动保存，便于多次标注The original data can be saved automatically for multiple annotations.

镜像功能，可保存标注后文件  Mirror function to save annotated files

可对X、Z1轴当前位置进行监控  The current position of X and Z1 axes can be observed.

具有测针自动接触、自动抬起、自动回退功能  Stylus automatic contact, lifting and return .

可以对操作进行无限次的撤销及恢复操作  Indefinitely operation for Revoked and Restored

捕捉开关打开时，自动生成及捕捉交点、圆心 、线段中点、端点、圆弧交点、中点、切点等特征点

When the capture switch is turned on, it automatically generates and captures the characteristics of intersection point, circle center, line segment point, end point, arc intersection point, midpoint and tangent point.

即使在非比例放大的情况下，也能进行正常的角度、圆弧、水平、垂直、线性等标注。

Even in the case of non-proportional amplification, normal angle, arc, horizontal, vertical and linear labeling can be annotated normally.

软件界面：

设备尺寸Equipment size

使用要求Usage requirement

功率需求(Power)： AC 220V±10%  50Hz

环境要求(Environment requirement)：温度(T)：10～30℃；相对湿度(RH)：＜85%

安装地点无明显振源 (No obvious vibration)

单独地线 (Independent grounding)

主要配置Main configuration

售后服务

质保期：设备安装验收合格之日起12个月内，但不超过发货之日起15个月。

Warranty period: 12 months from the date of equipment installation and acceptance, but not more than 15 months from the date of shipment.

质保期内：实行“三包”政策，公司负责为用户免费提供计量测试技术咨询服务。

Warranty period: Three guarantees, meanwhile providing free testing or technology consulting

质保期外：我公司提供终身优惠服务和技术支持，设备出现故障需要修理时，所换零件按成本价收取。我司有备品备件库，终身负责为用户以成本价提供备品备件服务。

After warranty: Providing service and support for life, and spare part with the best price, and if hardware support, the software updating free of charge.

服务响应时间：接到故障请求电话后，5小时内回应，我司通过电话、微信或邮件的方式指导买方排除故障；若故障仍不能排除，将在72小时内派技术人员上门解决问题。

Service response time: within 5 hours upon receipt of the fault request call, our company will guide the buyer to troubleshoot the fault by phone, WeChat or email. If the fault cannot be removed, technicians will be sent to solve the problem within 72 hours.