采用5.7英寸（120×90）单彩液晶触摸显示屏，中文菜单显示。公称规格、设定载荷、加载跨度、打印设定、测试、上行、下行、时间、标定。由键盘控制液晶显示屏上的菜单，采集导管屈服大强度，机载打印测试数据。

设定荷载：0.5～10N，     精度：±0.01N；
加载速率：加载到设定值时其速度为1mm/min;
加载跨度：20～60mm,     精度：±0.1mm(4种规格)；
挠度测试：0～0.8mm，    精度：±0.1mm；
打印方式：每次可打印8次、13次或20次测试数据及平均挠度值和偏差值。
净重：20kg
外形尺寸：400×290×240（mm）
医用留置针刚性测试仪是根据 “制造医疗器械用不锈钢针管”中的有关条款而设计制造的。专门用于测试医用留置针（管）的刚性。
    留置针刚性测试仪由智能控制器、测力机构、测距机构、打印机等部分组成。其中智能控制器由CPU、主板、液晶显示屏、键盘、电源等部分组成。
 屏幕采用全中文视窗显示，用键盘控制光标进行选项、操作、设定，无须培训，即可按提示操作使用

Using 5.7 inches (120 * 90) single color LCD touch screen, Chinese menu display. Nominal specifications, setting load, load span, print setup, test, uplink, downlink, time, calibration. The menu is controlled by the keyboard, the maximum strength of the duct is sampled, and the test data is printed on the air.
Setting load: 0.5 ~ 10N, accuracy: + 0.01N;
Load rate: the speed is 1mm/min when loaded to the set value;
Loading span: 20 ~ 60mm, accuracy: + 0.1mm (4 specifications);
Deflection test: 0 ~ 0.8mm, accuracy: + 0.1mm;
Printing method: print 8, 13 or 20 test data, average deflection and deviation value every time.
Net weight: 20kg
Size: 400 * 290 * 240 (mm)
The rigidity tester for medical indwelling needles is designed and manufactured according to the relevant articles in the stainless steel needle tubes for making medical instruments. Designed to test the rigidity of a medical indwelling needle (tube).
The rigid tester for YG2006-A medical indwelling needle consists of intelligent controller, force measuring mechanism, distance measuring mechanism, printer and so on. The intelligent controller consists of CPU, main board, LCD screen, keyboard, power supply and so on.
The screen adopts the full Chinese window display, uses the keyboard to control the cursor to carry on the option, the operation, the establishment, does not need to train, may use according to the prompt operation