正西液压 复合材料模压成型机 Yz71-4000T 八面导向系统 高精度

      本系列产品适用于汽车、航空航天、家电、等行业热固性、热塑性塑料制品成型。

      复合材料种类多，目前市场上液压机成型中广泛应用的复合材料有玻璃纤维、炭纤维、玄武岩纤维等主导材料。

      液压机在产品工艺中主要承担模压成型工艺，利用各异型的模具，通过高压与热固成型。根据模具与产品配方不同，制造出各种形状、各种颜色、各种强度的复合材料产品。

• l 主要用于热固性（玻璃钢）塑料制品、热塑性制品的整体模压成型，适用于SMC、BMC、DMC、GMT等各种团材及片材的模压成形；

• It is mainly used for the integral forming of thermosetting (FRP) plastics and thermoplastic products. Suitable for the forming of SMC, BMC, DMC, GMT and other bulks and sheets.

• l 八面式导向结构，加大导向面积，抗篇载能力强；

• Eight sides guiding structure, enlarge guiding area, greatly improved incline load proof capacity.

• l 多缸均布结构，横梁加高式设计，模压成型稳定性更强；

• Uniform distribution of multiple cylinders, design of Cross Beam Heightening, making the forming process more stable.

• l 液压系统安装在机顶上，配维修平台，环保，噪音低，维保方便；

• Hydraulic system is installed on the roof with maintenance platform, environmentally friendly, low noise and easy maintenance.

• l ≥500mm/s速度快速合模，可分多段速度慢速加压成型，合理预留排气时间；

•  Shutting mold speed more than 500mm/s, multiple-stage slow speed pressure forming, reasonable reserved exhaust time

• l 高压慢开模功能，适用于较高的产品；

• With the function of high pressure slow opening mold, suitable for high products.

• l 伺服系统快速响应，全数字化控制，油泵功率节能40%-80%；

• l Quick response of system, numerical control system, the energy saving rate of oil pump can reach 40%-80%.

• l 微电脑闭环加热控制系统，温控可达±2℃，模具加热节电10%以上;

• Microcomputer closed-loop heating control system, temperature control can reach ±2℃, mold heating energy saving more than 10%.

• l 可选：废气净化系统，换模小车，远程售后服务系统，双闭环伺服系统；

• l Optional accessories: waste gas purification system, mold change car, remote after-sale service system, double closed loop servo system.

• l 采用双闭环伺服系统压力控制精度可达±0.05Mpa，位置控制精度可达±0.01mm；

• The pressure control accuracy of double closed-loop servo system can reach ±0.05 Mpa， and the position control accuracy can reach ±0.01 mm.

•