供应河南施诺依轮毂拉丝机 免编程全自动轮毂拉丝机设备 厂家直销

买东西千挑万选，到后期还是会犹豫，我们不怕质疑，您的任何疑问都在情理之中，都不过分，因为每个人都想要好的。而我们不怕质疑，因为我们用实力说话！没有天花乱坠的广告，也没有花言巧语，设备好不好，用过的客户都知道，所以，不管您有什么疑问都可以来咨询我，我们诚挚的欢迎您！

轮毂拉丝机——轮毂拉丝修复类设备

      轮毂拉丝机使用前景非常大，客户群体比较广泛，轮毂拉丝机操作简单，维护方便；轮毂拉丝机采用模块化设计，结构简单；任何产品的诞生都是行业的需求的结果，轮毂拉丝机的不断更新换代，是市场需求的必然结果。

施诺依轮毂拉丝机展示图

轮毂拉丝机操作要求，注意事项
1、两人作业时，设备后方的操作人员不得正对拉丝机出口，以免工件万一飞出伤人。
2、轮毂拉丝机设备在正常运行状态下严禁调整轮毂拉丝深度，以免车刀失控造成设备、人身事故。
3、正确安装轮毂。认真检查上、下轴承座及升降丝杠润滑是否良好，确定出料上正面无人时方可开机。
4、轮毂拉丝机设备启动后立即检查轮毂摆幅是否在要求范围内，有无其它异常现象，否则应立即调整或关机处理。

5、严禁工件直接放在夹具上，严禁工作门不关闭无挡条直接放工件拉丝，以免工件飞出伤人。
6、拉丝机深度调整应适中，一般情况下的拉丝深度指示应在0.2-0.05之间，严禁超过0.3MM，以免造成设备或人身事故。

Operational requirements and precautions of hub wire drawing machine

1. When two persons work, the operator behind the equipment shall not export the wire drawing machine in order to avoid injuring the workpiece in case of flying out.

2. It is forbidden to adjust the drawing depth of hub wire drawing machine under normal operation, so as to avoid equipment and personal accidents caused by tool out of control.

3. Install hub correctly. Check carefully whether the lubrication of upper and lower bearing seats and lifting screw is good or not, and make sure that the machine can start when no one is on the front of the discharging material.

4. Check whether the hub swing is within the required range and if there are any other abnormal phenomena immediately after the start-up of the hub drawing machine equipment. Otherwise, it should be adjusted or shut down immediately.

5. It is strictly forbidden to place the workpiece directly on the fixture. It is strictly forbidden to place the workpiece wire drawing directly without closing the work door, so as to avoid the workpiece flying out and hurting people.

6. The adjustment of drawing machine depth should be moderate. In general, the indication of drawing depth should be between 0.2 and 0.05. It is strictly forbidden to exceed 0.3MM in order to avoid equipment or personal accidents.

免编程自动轮毂拉丝机的七大特点： 
1、采用激光扫描技术，减少出错率。

2、无需手动编程、分段，操作速度快，效率高。

3、操作简单易学易懂，无需专业编程师傅。

4、普通技术师傅都会操作，节省请专业师傅的劳动力成本。 
5、可实现远程培训教学，足不出户可以掌握技术。
6、自动机械控制，技术不会掌握在一个师傅手上，便于管理。 
7、留有升级的端口，后期根据我司设备发展有可继续升级的空间。

 Seven features of programmable automatic hub drawing machine:

1. Using laser scanning technology to reduce the error rate.

2. No manual programming and segmenting are needed. The operation speed is fast and the efficiency is high.

3. The operation is easy to learn and understand without professional programmers.

4. General technicians can operate, saving the labor cost of professional teachers.

5. Long-distance training and teaching can be realized, and technology can be mastered without leaving home.

6. Automatic mechanical control, technology will not be mastered in the hands of a master, easy to manage.

7. Keep the port for upgrading. Later, according to our company's equipment development, there is room for further upgrading.

轮毂修复后效果图

我们的服务

■.远程服务：公司可以通过远程为客户诊断机床状况和远程培训服务。

 remote service: the company can diagnose the machine tool condition and remote training service for customers by remote.

■.现场培训：客户来公司培训或公司派人去培训

 field training: customers come to company training or company send people to train.

■.随机文字资料

.random text data

◇机床说明书

Machine tool manual

◇数控系统说明书

CNC System Manual

◇常见问题和解决方法

Common problems and Solutions

■随机视频资料

 random video data

■程序优化教学视频

Program optimization of teaching video

■机床安装、操作、测量、加工全过程视频

The whole process of installation, operation, measurement and processing of machine tools.

■免费培训修复技术，可上门培训

 free training and repair technology, door-to-door training