凤岗移动集装箱铁皮房外墙装饰材料弧形pvc挂板外墙扣板筠尚品牌

1. 筠尚PVC外墙挂板寿命长达30年以上，解除了传统涂料短时间内重刷的烦恼，其综合成本远远低于瓷砖、涂料、大理石等。

2. 凤岗移动集装箱铁皮房外墙装饰材料弧形pvc挂板外墙扣板筠尚品牌
   

2.安装施工快捷，对基层要求不高，不必铲除原有墙面，可直接在墙面安装保温层并在保温层面安装挂板，免去了传统镶瓷砖时墙面重刷水泥面的成本。尤其旧墙面，可以不做处理而直接施工。

3.本产品节能性好，可回收再利用，且环保。

4.外墙挂板可以和传统的外墙材料面砖，涂料及石材，不管是颜色还是质感都可以和谐的配合。

5.挂板的木纹工艺，可以使住宅的立面丰富。

6.干法作业，四季施工。

7.保护墙面防止开裂。

按照GB/T5761-2006《悬浮法通用型聚氧乙烯树脂
标,乙树面的指标主要有数区值平均合度、
质粒子数、挥发物、表观密度、余物、“鱼眼”数、增塑剂吸收
量、白度、水苯取物电导率、残留 单体含量10项。除此之
外,分子量分布、热稳定时间、干流性、流变性等也是聚氯乙的
重要指标。下面逐项进行分析介绍。中器
(1)黏数(K值或平均聚合度)合物的分子量通常是在精
溶液状态下测定的,通过测定聚合物溶液的数来表征聚合物分子
量大小,划分聚合物型号。聚氯乙烯树脂不同溶液测定的度,通
过计算、换算可以得到黏数、K值、平均聚合度,受国标影响
国内企业多以甜数划分和表示聚氯乙烯树脂的不同牌号,国际上却
以K值表示居多。

Yunshang PVC wall hanging board life of more than 30 years, lifted the traditional coating in a short time to brush the trouble, its comprehensive cost is far lower than tile, paint, marble, etc.

Fenggang mobile container iron room exterior wall decoration material arc PVC wall gusset plate junshang brand

2. Quick installation and construction, low requirements for the basic level, no need to eradicate the original wall, can be installed directly in the wall insulation layer and insulation layer board installation, from the traditional ceramic tile when the wall re-brush cement surface cost.Especially old metope, can not do processing and direct construction.

3. This product is energy-saving, recyclable, and environmentally friendly.

4. The external wall hanging board can work in harmony with the traditional external wall materials, such as face brick, paint and stone, regardless of color or texture.

5. The wood grain technology of hanging board can enrich the facade of the house.

6. Dry operation, construction in four seasons.

7. Protect walls from cracking.

According to GB/ t5761-2006 "suspension method general purpose polyoxyethylene resin.

Standard, the indicators of b-tree mainly include the average conformance of several values,

Mass particle number, volatile matter, apparent density, residue, "fisheye" number, plasticizer absorption

Quantity, whiteness, electrical conductivity of benzene water, residual vinyl chloride monomer content 10 items.In addition the

In addition, the molecular weight distribution, thermal stability time, dry flow, rheology and so on are also polyvinyl chloride

Important indicators.The following is an analysis and introduction item by item.In the device

(1) viscosity (K value or average degree of polymerization)

In solution, a polymer molecule is characterized by measuring the number of polymer solutions

Measure and classify polymer models.Determination of polyvinyl chloride resin in different solutions, through

After calculation and conversion, viscosity, K value and average degree of polymerization can be obtained, which are affected by the national standard

Domestic enterprises are mostly divided by the number of sweet and different brands of polyvinyl chloride resin, but the international

In terms of K.