好货推荐
获取最低报价
商家收到后会立即联系您
请阅读并同意隐私政策
相关产品推荐
进入手机版
牌号 : |
5832C-11204 |
加工级别 : |
注塑级 |
特性级别 : |
阻燃级,透明级 |
用途级别 : |
通用级 |
品牌 : |
沙伯基础 |
产地 : |
南沙 |
品名 : |
PC |
是否进口 : |
否 |
厂家(产地) : |
沙伯基础(南沙) |
产品详情
Product details
| LEXAN 5832C Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and tinted color options. LEXAN 5832C is a general purpose resin designed to meet the needs of various applications. |
| Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 630 | kgf/cm² | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 680 | kgf/cm² | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 6 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 125 | % | ASTM D 638 | |
| Tensile Modulus, 50 mm/min | 23100 | kgf/cm² | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 1020 | kgf/cm² | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 24100 | kgf/cm² | ASTM D 790 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 81 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Total Energy, 23°C | 805 | cm-kgf | ASTM D 3763 | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 143 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 137 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 3.2mm, unannealed | 126 | °C | ASTM D 648 | |
| CTE, -40°C to 40°C, flow | 6.84E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, xflow | 7.38E-05 | 1/°C | ASTM E 831 | |
| Relative Temp Index, Elec | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 120 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.19 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 0.6 - 0.8 | % | SABIC Method | |
| Melt Flow Rate, 300°C/1.2 kgf | 10 | g/10 min | ASTM D 1238 | |
| ELECTRICAL | Value | Unit | Standard | |
| Arc Resistance, Tungsten {PLC} | 7 | PLC Code | ASTM D 495 | |
| Hot Wire Ignition {PLC) | 2 | PLC Code | UL 746A | |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A | |
| High Ampere Arc Ign, surface {PLC} | 3 | PLC Code | UL 746A | |
| Comparative Tracking Index (UL) {PLC} | 2 | PLC Code | UL 746A | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Recognized, 94V-2 Flame Class Rating (3) | 0.8 | mm | UL 94 | |
| UL Recognized, 94V-0 Flame Class Rating (3) | 3.04 | mm | UL 94 | |
| Glow Wire Flammability Index 960°C, passes at | 1 | mm | IEC 60695-2-12 | |
| Glow Wire Ignitability Temperature, 1.0 mm | 850 | °C | IEC 60695-2-13 | |
| Oxygen Index (LOI) | 35 | % | ISO 4589 | |
| Source GMD, last updated:2008/05/20 |
| Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 120 | °C |
| Drying Time | 2 - 4 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 280 - 310 | °C |
| Nozzle Temperature | 270 - 290 | °C |
| Front - Zone 3 Temperature | 280 - 310 | °C |
| Middle - Zone 2 Temperature | 270 - 290 | °C |
| Rear - Zone 1 Temperature | 260 - 280 | °C |
| Hopper Temperature | 60 - 80 | °C |
| Mold Temperature | 80 - 110 | °C |
温馨提示您:
因本页面展示有限无法完全描述产品更多相关信息；塑胶原料行情每天每时波动较大无法及时更新，请亲们理解！
产品信息和最新价格请您及时来电！
搜好货供应商东莞市胜浩塑胶原料有限公司供应PC 沙伯基础 5832C 11204 透明阻燃V0级PC PC5832C 透明防火PC，为您提供详细的产品报价、参数、图片等商品信息，如需进一步了解PC 沙伯基础 5832C 11204 透明阻燃V0级PC PC5832C 透明防火PC，请与厂家直接联系，请在联系时说明是在搜好货网看到这条商机的。
为您精选
-
耐寒PVC 可以达到零下45℃ 不易挥发分解
¥26.50 -
PVC增塑剂 增韧PVC氯化聚乙烯抗寒剂 零
¥26.50 -
非牵移ABS改性剂 氯化橡胶 透明液体橡胶
¥26.50 -
可发泡液体橡胶LGCR工业发泡制品用液体氯化
¥26.50 -
PVC皮革或软管材 PVC线材等制品耐折PV
¥26.50
-
超耐低温橡胶零下45℃无脆化PVC抗寒性好用
¥26.50 -
长效抗静电剂 PE薄膜防静电母粒 聚乙烯
¥118 -
长久PE抗静电剂 PE长久防静电母粒 制品表
¥118 -
3000目 PTFE粉 聚四氟乙烯微粉 胜浩
¥120 -
欧盟环保级PTFE细粉 3000目 4微米
¥120
此PC 沙伯基础 5832C 11204 透明阻燃V0级PC PC5832C 透明防火PC产品由东莞市胜浩塑胶原料有限公司在2019-05-21T03:30:22更新，主要更新内容为：产品参数,产品价格,产品图片,产品详情,产品促销语信息。
