水质净化用杏壳活性炭 果壳活性炭

 一、果壳活性炭简介：

果壳活性炭以优质核桃壳、桃壳、杏壳为原料，经系列生产工艺精加工而成。外观为黑色，呈颗粒状，具有空隙发达、吸附性能好、强度高、易再生、经济耐用等优点。主要用于冶金、钢铁、石油、化工、电力、饮用水、纯净水、制酒、饮料、工业污水的净化、脱色、脱氯、除臭；也可用于炼油行业的脱硫醇等。

二、果壳活性炭四大特性：     

催化特性：由于果壳活性炭和载持物之间会形成络合物，这种络合物催化剂使催化活性大增，活性炭在许多吸附过程中伴有催化反应，表现出催化剂的活性。特异的表面含氧化合物或络合物的存在，对多种反应具有催化剂的活性。发达的细孔结构、巨大的内表面积和很好的耐热性、耐酸性、耐碱性，可作为催化剂的载体。     

机械特性：粒度、堆密度、体积密度和颗粒密度、强度、耐磨性。这些机械性质直接影响果壳活性炭应用。     

化学特性：果壳活性炭的吸附性既取决于孔隙结构，又取决于化学组成。果壳活性炭含少量的化学结合、功能团开工的氧和氢。这些表面上含有的氧化物和络合物，有些来自原料的衍生物，有些是在活化时、活化后由空气或水蒸气的作用而生成。有时还会生成表面硫化物和氯化物。在活化中原料所含矿物质集中到活性炭里成为灰分，灰分的主要成分是碱金属和碱土金属的盐类。这些灰分含量可经水洗或酸洗的处理而降低。     

吸附特性：果壳活性炭是一种很细小的炭粒有很大的表面积，而且炭粒中还有更细小的孔——毛细管。这种毛细管具有很强的吸附能力，由于炭粒的表面积很大，所以能与气体（杂质）充分接触。当这些气体（杂质）碰到毛细管被吸附，起净化作用。

三、果壳活性炭注意事项：

1、果壳活性炭在运输过程中，防止与坚硬物质混状，不可踩、踏，以防炭粒破碎，影响质量。

2、储存应储存于多孔型吸附剂，所以在运输储存和使用过程中，都要 防止水浸，因水浸后，大量水充满活性空隙，使其失去作用。

3、防止焦油类物质在使用过程中，应禁止焦油类物质带入活性炭床，以免堵塞活性炭空隙，使其失去吸附作用。有除焦设备净化气体。

4、防火活性炭在储存或运输时，防止与火源直接接触，以防着火、活性炭再生时避免进氧并再生彻底，再生后必须用蒸汽冷却降至80℃以下，否则温度高，遇氧，活性炭自燃。

四、联系方式：

承德县中博活性炭厂

   销售经理：田小雪

手机：

QQ：2629817494

E-mail：2629817494@qq.com

网址：*  

地址：河北省承德县下板城镇下板城村

About a, nut shell activated carbon:

Nut shell activated carbon with high quality walnut shell, apricot shell, peach shell as raw material, through the series production process finishing. Appearance is black, granular, with a gap developed, adsorption performance is good, high strength, easy regeneration, economic and durable, etc. Mainly used in metallurgy, steel, petroleum, chemical industry, electric power, drinking water, pure water, wine, beverage, industrial wastewater purification, decolorization, dechlorination, deodorant; Also can be used in oil refining industry to take off the mercaptan, etc.

Second, nut shell activated carbon four features:

Catalytic properties: due to the nut shell activated carbon and the content will form between complex, this complex catalyst has increased, the catalytic activity of activated carbon in many accompanied by catalytic reaction, adsorption process showed the activity of catalyst. The existence of specific surface oxygen compound or a complex, for a variety of reactions with the activity of catalyst. Developed pore structure, large surface area and good heat resistance, acid resistance, alkali resistance, can be used as the carrier of catalyst.

Mechanical properties, particle size, bulk density, volume density and particle density, strength and wear resistance. These mechanical properties directly affect the nut shell activated carbon applications.

Chemical properties: nut shell activated carbon adsorption depends on the pore structure, and depends on the chemical composition. Nut shell activated carbon containing a small amount of chemical combination and functional group construction of oxygen and hydrogen. On the surface of oxides and complex, some derivatives from raw materials, some of them are at the time of activation, activated after generated by air or steam. Sometimes generate surface sulphate and chloride. Raw material contained in the activation of mineral concentration to become the ash content in the activated carbon, the main composition of ash is alkali metal and alkaline earth metal salts. The ash content can be reduced by water or acid treatment.

Adsorption characteristics, nut shell activated carbon is a kind of very small granular has a large surface area, and more tiny holes in the granular - capillary. The capillary has very strong adsorption capacity, due to the granular surface area is large, so a good contact with with gas (impurities). When these gases (impurities) encounter capillary by adsorption, purifying effect.

Third, nut shell activated carbon to note:

1, nut shell activated carbon in the process of transportation, prevent and hard material mix, do not step on, step, in case of charcoal grain crushing, affect the quality.

2, storage should be stored in the groove adsorbent, more so in the process of transportation storage and use, will absolutely prevent water immersion, due to flooding, after a lot of water is full of activity space, lose its effect.

3, prevent tar material in use process, should be prohibited from tar class material to the activated carbon bed, lest jam activated carbon, lose its adsorption. It is better for decoking equipment to purify the gas.

4, fire activated carbon during storage or transportation, avoid direct contact with fire, in case of fire, into the oxygen and regeneration completely avoid when activated carbon regeneration, regeneration after have to use steam cooling down to under 80 ℃, otherwise the temperature is high, meet oxygen, activated carbon combustion.

Contact information:

Chengde county zhongbo activated carbon factory

Sales manager: miss.Tian

Phone:

QQ: 2629817494

E-mail:2629817494@qq.com

Website:

Add:Xianbancheng Village,Xianbancheng Town,chengde city in hebei,China.

六、联系方式：

承德县中博活性炭厂

销售经理：田小雪

手机：

   QQ：2629817494

E-mail：2629817494@qq.com

网址：*  

地址：河北省承德县下板城镇下板城村