950碘值硬度好 柱状/球状脱硫活性炭 宁夏原生炭脱硫炭直销

A brief introduction to desulphurization

Desulphurization activated carbon is in the process of refined gasoline, using activated carbon load sulfonated cobalt, titanium cyanide for crude oil in overweight mercaptan removal, thus reducing the gasoline sulfur content, improve quality, conform to the requirements of state environment protection.

Desulphurization activated carbon is to add a dozen promoter and has developed micropore structure of gas catalyst, hydrogen sulfide in gas and some of the essence of organic sulfur removal. Desulfurizing activated carbon is widely used in methane, liquefied gas and other gas sources to eliminate hydrogen sulfide and some organic sulfur. It is characterized by high operation, high purification, low resistance of bed layer, high adaptability, hydrogen sulfide and some organic sulfur. It is a kind of new and efficient gas catalyst, which can maintain high activity and capacity under normal temperature and constant pressure.

Desulphurizing activated carbon characteristics

Particularly effective desulphurization activated carbon adsorption of SO2, including physical adsorption and chemical adsorption, when there is no water vapor and oxygen in flue gas, mainly physical adsorption, adsorption volume is small. When smoke contains enough water vapor and oxygen, and activated carbon method flue gas desulfurization dust collector is a chemical adsorption and physical adsorption of process at the same time, the first is the physical adsorption, and then in the presence of water and oxygen to adsorption on the surface of the activated carbon catalytic oxidation of SO2 is - H2SO4, SO2 adsorption quantity increased.

Greater than surface area and adsorption value. As the active carbon of sulfonated titanium cyanide, it is required to have high adsorption value of the methylene blue, the middle hole is developed, and the load exceeds the ordinary active carbon.

2, the strength is good, not fragile. Due to the load sulfonated cobalt titanium with activated carbon, to accept the pressure test again and again in the fixed bed, soaking solution, so requires high strength, better particle is a natural shape.

3, the ash content is low. In order to ensure the smooth chemical reaction of the catalyst, it is necessary to minimize the amount of impurities such as ash, metal ions and so on. Increase the utilization of activated carbon pore.

4, low moisture content. Try to keep the charcoal as low as possible to avoid affecting its function.

The use of desulphurization activated carbon

Desulphurizing activated carbon is good for the desulfurization, detoxification and deodorization of gases and liquids. , plating, silver can be widely used in metallurgy, light industry, petrochemical, food, medicine, printing and dyeing, MSG, oil decolorization, solvent recovery, catalyst carrier, air purification, water treatment, melamine, sugar, liquid phase and qing, oil absorption, all kinds of fine desulfurization tower, etc.

Desulfurizing activated carbon is widely used in methane, liquefied gas and other gas sources to eliminate hydrogen sulfide and some organic sulfur. Has simple operation, high degree of purification in the use, small bed layer resistance, strong adaptability, hydrogen sulfide and part of fast speed, high capacity characteristics of organic sulfur, it is a new type of high efficient catalyst, gas can keep under normal temperature and normal pressure higher activity and capacity.

Matters for storage of desulphurized activated carbon transport

In the process of transportation, the active carbon is not to be mixed with hard material, not to tread or tread, in case the carbon is broken and the quality is affected.

2, should be stored in multiple pass adsorbent, so in the process of transportation storage and use, will absolutely prevent water immersion, due to flooding, after a lot of water is full of activity space, make them.

3, prevent tar material in use process, should be prohibited from tar class material to the activated carbon bed, lest jam activated carbon, lose its adsorption, good decoking equipment to purify the gas.

4, fire prevention, when activated carbon storage or transportation, avoid direct contact with fire, in case of fire, into the oxygen and regeneration completely avoid when activated carbon regeneration, regeneration after have to use steam cooling down to under 80 , otherwise the temperature is high, meet oxygen, activated carbon combustion.

The packing of the usual 25kg double woven bag can also be packed according to the customer's requirements

Ningxia longteng activated charcoal co., LTD

Lian: zhi wen

Hand machine:

Q: 3195997413

Mailboxes: 3195997413@qq.com

Site: east of baiyin, the great wukou district of ningxia

Site: *? SPM = 0.0.0.0. SSEfoR