滤料类型 : |
石英砂 |
适用对象 : |
水 |
用途 : |
水过滤 |
性能 : |
防静电,防火,防水,耐酸,耐低温,耐高温,耐碱,其他 |
类型 : |
品牌 : |
龙腾顺达 |
|
吸附率 : |
98% |
抗压力 : |
350kgf |
密度 : |
2.66g/cm3 |
孔隙率 : |
45% |
磨损率 : |
0.2 |
硬度 : |
7 |
化学成分 : |
SiO2 |
可溶率 : |
0.02% |
颜色 : |
高白 普白 |
石英砂简介
石英砂中矿物含量变化较大,以石英为主,其次为长石、云母、岩屑、重矿物、黏土矿物等。精制石英砂是重要的工业矿物原料,广泛用于玻璃、铸造、陶瓷及耐火材料、冶金、建筑、化工、塑料、橡胶、磨料等工业。
石英砂滤料采用天然的石英矿经粉碎、筛选、水洗等工艺加工而成,外观呈多棱形、球状,纯白色,具有机械强度高、截污能力强、耐酸性能好等优点。无杂质,抗压耐磨,机械强度高,化学性能稳定,截污能力 益高、使用周期长,适用于单层、双层过滤池、过滤器和离子交换器中,各项指标均达到(CJ/T43-2009)标准。加工有精制石英砂,纯白石英砂,酸处理剂,普通石英砂,可满足不同用户的使用需求。常用规格:0.5-1.0mm、0.6-1.2mm、1-2mm、2-4mm、4-8mm、8-16mm、16-32mm等。
石英砂提纯工艺
工业上的石英砂原料为满足工业上的需求,可以通过选矿工艺提高其品位。主要有以下一些提纯方法:
1、擦洗脱泥--擦洗是指借助机械力和砂粒间的磨剥力来除去石英砂表面的薄膜铁、粘结及泥性杂质矿物和进一步擦碎未成单体的矿物集合体,再经分级作业达到进一步提纯石英砂的效果。目前主要有棒磨擦洗和机械擦洗。影响擦洗效果的主要因素为擦洗机的结构特点及配置形式;次要因素为擦洗时间、擦洗浓度(擦洗浓度一般以5060为宜)。
2、磁选--磁选主要用于除去石英砂中的磁性矿物,如可以通过强磁性机除去赤铁矿、褐铁矿、黑云母等弱磁性矿物,而强磁性矿物如磁铁矿则可以通过弱磁选机除去。
3、浮选--浮选用于除去石英砂中的长石、云母等一些磁选无法除去的杂质,进一步提高其纯度。
4、酸浸--酸浸是利用石英不溶于酸(HF酸除外),而其它杂质矿物能被酸液溶解的特点,可以实现对石英的进一步提纯。
5、微生物浸出--微生物浸出是指利用微生物浸除石英砂颗粒表面的薄膜铁或浸染铁,这是新近发展起来的一种除铁技术。
石英砂滤料指标
项目 |
单位 |
分析结果 |
项目 |
单位 |
分析结果 |
含泥量 |
% |
0.05 |
可溶率 |
% |
0.02 |
密度 |
g/cm3 |
2.66 |
耐酸度 |
% |
98 |
磨损率 |
% |
0.03 |
孔隙率 |
% |
43 |
破碎率 |
% |
0.35 |
容量 |
g/cm3 |
1.75 |
氧化硅 |
% |
99.3 |
莫氏硬度 |
度 |
7.5 |
石英砂滤料用途
石英砂滤料不仅是单层过滤材料,而且和无烟煤滤料作双层过滤比较理想。精制石英砂滤料适用于生活饮用水过滤和其它水质净化处理,更加适合于石油、化工、矿山、冶金、热电、造纸、印染、制革、食品等生产用水的前期处理和循环水处理,以及污水的回收利用。
普通石英砂滤料:主要用在污水处理中,用三五年都没问题,只要防止石英砂流失就行,被污染了不要紧,因为污水处理中,污泥可以进行好氧或者厌氧呼吸,将污水中的污染物降解。
精制石英砂滤料:用在纯水处理中,在砂滤器中,一般2到3年就要更换,通常被污染后,污染物包住石英砂就不能再起到很好的过滤作用了,只能更换。石英砂滤料通过Iso9001-2000质量体系认证。在中性及值在范围内的酸性水中都很稳定,但在碱性水中有微溶解,化学水处理中SiO2增量不超过2mg/L。
石英砂是重要的工业矿物原料,非化学危险品,广泛用于玻璃、铸造、陶瓷及耐火材料、冶炼硅铁、冶金熔剂、冶金、建筑、化工、塑料、橡胶、磨料等工业。可汽运,火车运输,水运。工业生产一般为50KG或25KG包装及出口吨袋包装。
宁夏龙腾顺达活性炭有限公司
唐芷文
手 机:
Q Q :3195997413
邮 箱:3195997413@qq.com
地 址:宁夏石嘴山市大武口区白银北路以东
网 址:
Quartz sand profile
The mineral content of quartz is mainly in quartz, followed by feldspar, mica, cuttings, heavy minerals and clay minerals. Refined quartz sand is important industrial mineral raw materials, widely used in glass, foundry, ceramic and refractory materials, metallurgy, construction, chemical, plastic, rubber, abrasive and other industries.
Quartz sand filter material is made of natural quartz ore after crushing, screening and washing process, such as prismatic, globular appearance, pure white, has high mechanical strength, sewage capability is strong, acid-proof performance is good wait for an advantage. Without impurities, compression wear-resisting, high mechanical strength, stable chemical performance, sewage capability, high efficiency, long cycle life, suitable for single, double filter tank, filter and ion exchanger, all the indexes reach the standard (CJ/T43-2009). The processing has refined quartz sand, pure white quartz sand, acid treatment agent, common quartz sand, can meet the use demand of different users. Common specification: 0.5-1.0 mm, 0.6-1.2 mm, 1-2mm, 2-4mm, 4-8mm, 8-16mm, 16-32mm, etc.
Quartz sand extraction process
The stone and sand raw material of industry is to satisfy the demand of industry, can improve its grade through the mineral processing technology. Here are some of the following tips:
1, swab swab desliming - refers to the aid of mechanical force and sand grain peel force to remove the film on the surface of the quartz sand grinding impurity iron, bonding and clay mineral and further chopped into single mineral aggregate, then through classification work to achieve the effect of further refining quartz sand. At present, there are mainly good abrasion and mechanical scrubbing. The main factors affecting the swabbing effect are the structural characteristics and configuration of the scrubbing machine. The secondary factors are scrubbing time and scrubbing concentration (scrubbing concentration is usually 50 to 60).
2, magnetic separation, magnetic separation is mainly used for removing the magnetic minerals in quartz sand, such as by strong magnetic machine to remove hematite, limonite, biotite weak magnetic minerals, such as the strong magnetic minerals, such as magnetite by weak magnetic separator can be removed.
Flotation - flotation is used to remove impurities which are not able to be removed by the magnetic fields such as feldspar and mica, and further improve its purity.
4, acid leaching, acid leaching is the use of quartz insoluble in acid (except for HF acid), the characteristics of mineral and other impurities can be acid to dissolve, can realize further purification of quartz.
5, microbiological leaching, microbial leaching is the use of microorganisms in addition to quartz sand particles on the surface of the film iron or iron and this is a newly developed a kind of iron removal technology.
Use of quartz sand filtration material
The quartz sand filter is not only the filter material of single layer, but also the double filtration of anthracite filter is ideal. Refined quartz sand filter material is suitable for domestic and drinking water filter, and other water purification treatment, is more suitable for petroleum, chemical, mining, metallurgy, thermal power, papermaking, printing and dyeing, leather, food, etc. In the early period of the production of water treatment and circulating water treatment, and sewage recycling.
Ordinary quartz sand filter material: mainly used in sewage treatment, with three to five years is no problem, just prevent quartz sand erosion, polluted it doesn't matter, because in the sewage treatment, sludge can be aerobic or anaerobic respiration, the pollutant degradation in wastewater.
Refined quartz sand filter material: used in pure water processing, in the sand filter, generally 2 to 3 years to be replaced, usually after contaminated pollutant encase quartz sand can't cause to the very good filtering effect, can only be replaced. Quartz sand filter is certified by iso9001-2000 quality system. The acidic water in the range of neutral and value is stable, but in alkaline water it is slightly dissolved, and the amount of SiO2 in chemical water treatment is no more than two m g/L.
Quartz sand is important industrial mineral raw material, the hazardous chemicals, widely used in glass, casting, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemical, plastic, rubber, abrasive and other industries. It can be run by steam, by train, by water. Industrial production is generally 50KG or 25KG packing and export tonnage bags.
Ningxia longteng activated charcoal co., LTD
Lian: zhi wen
Hand machine:
Q: 3195997413
Mailboxes: 3195997413@qq.com
Site: east of baiyin, the great wukou district of ningxia
Site: ? SPM = 0.0.0.0. SSEfoR
宁夏龙腾顺达活性炭有限公司
唐芷文
手 机:
Q Q :3195997413
邮 箱:3195997413@qq.com
地 址:宁夏石嘴山市大武口区白银北路以东
网 址:
为您精选
发送询价单
您对该公司的咨询信息已成功提交,请注意接听供应商电话。
联系人信息
请输入您的称呼
请输入正确的联系方式
请选择咨询问题
请输入正确的图形验证码
商家已收到您的消息,请注意接听供应商的来电~
确保商家能在第一时间与您取得联系
请留下您的联系方式
请输入正确的联系电话
请输入称呼或公司名称
请输入验证码