耐火温度 : |
1770~2000℃(℃) |
产地 : |
河南 |
品牌 : |
万丰 |
产品类别 : |
窑炉工业窑炉用保温材料 |
材质 : |
EPS |
导热系数(常温) : |
0.035 |
等级 : |
一级 |
低温弯折≤ : |
10 |
断裂伸长率 : |
15 |
抗弯强度 : |
90 |
抗压强度 : |
95 |
拉伸强度 : |
50 |
使用温度 : |
1500 |
撕裂强度 : |
95 |
芯材 : |
hdf |
形态 : |
粉状 |
形状 : |
粉状 |
巩义市万丰磨具磨料有限公司是专业的水处理材料生产厂家,主营产品有三大系列:
一、喷砂抛光系列:棕刚玉、黑刚玉、白刚玉、碳化硅、石榴石、玉米芯、水刀砂、抛光砂、除锈砂、还原铁粉等。
二、滤料系列:鹅卵石、麦饭石、沸石、陶粒、磁铁矿、海绵铁等。
三、耐火材料系列:铝矾土、蓄热球、氧化铝球、高铝球、研磨球、浇注料、耐火泥、铬钢玉、锆刚玉、锆英砂、氧化铬绿、氧化铝粉、球石、漂珠等。
我公司一直坚持:“品质承诺、价格合理、服务快捷、诚心创新”的发展理念,不仅为客户提供高品质的产品,并努力做好客户的售后服务工作!热诚欢迎国内外宾朋光临,大量现货供应,欢迎订购!
耐火泥简介
耐火泥由耐火粉料、结合剂和外加剂组成。几乎所有的耐火原料都可以制成用来配制耐火泥所用的粉料。以耐火熟料粉加适量可塑黏土作结合剂和可塑剂而制成的称普通耐火泥,其常温强度较低,高温下形成陶瓷结合才具有较高强度。以水硬性、气硬性或热硬性结合材料作为结合剂的称化学结合耐火泥,在低于形成陶瓷结合温度之前即产生一定的化学反应而硬化。耐火泥的粒度根据使用要求而异,其极限粒度一般小于1mm,有的小于0.5mm或更细。选用耐火泥浆的材质,应考虑与砌体的耐火制品的材质一致。耐火泥除作砌缝材料外,也可以采用涂抹法或喷射法用作衬体的保护涂层。
耐火泥分类
耐火泥按耐火度高低分为:普通耐火材料、高级耐火材料、特级耐火材料。
耐火泥按化学特性分为:酸性耐火材料、中性耐火材料、碱性耐火材料、特殊场合的耐火材料。
耐火泥根据组成材质的不同可以分为:枯土质耐火泥、高铝质耐火泥、硅质耐火泥、镁质耐火泥等。
耐火泥按照结合剂的不同可分为:陶瓷结合耐火泥它是由耐火细骨料和陶瓷结合剂(塑性粘土)组成的混合料、水硬性结合耐火泥、化学结合耐火泥。
耐火泥理化指标
名称 |
数值 |
||
较高使用温度() |
1400 |
||
耐火度() |
1785 |
||
110 | 干燥体积密度(kg/ m3) | 2200 |
|
冷态耐压强度(MPa) |
110 |
100 |
|
1000 |
110 |
||
1300 |
140 |
||
线变化率(1000)% |
<+0.3 |
||
线变化率(1300)% |
<+0.7 |
||
导热系数--温度600(W/mK) |
2.3 |
||
Al2O3() |
60 |
||
SiO2() |
11.0 |
||
Fe2O3() |
1.2 |
耐火泥用途
1、可塑性好,施工方便;
2、粘结强度大,抗蚀能力强;
3、耐火度高较高;
4、抗渣侵性好;
5、热剥落性好。耐火泥主要应用于焦炉、玻璃窑炉、高炉热风炉、其它工业窑炉。应用的行业有:冶金,建材,机械,石化,玻璃,锅炉,电力,钢铁,水泥等。
英文翻译
Refractory mortar introduction
Refractory mortar consists of refractory powder, binder and additive.Almost all of the refractory raw material can be made to make powder used in the refractory mortar.Add right amount for the refractory clinker powder plastic clay as binder and plasticizer and said common refractory mortar, the normal temperature strength is low, high temperature ceramic combination with high strength.Water hardness, gas rigid or hard combined with material as binder said chemical combination of refractory clay, before the temperature below into ceramic combined produce certain chemical reactions and hardening.Refractory clay particle size varies according to using requirements, its limit size generally less than 1 mm, there is less than 0.5 mm or more.Choose the material of refractory slurry, consideration should be given in accordance with the material of masonry of refractory products.Refractory mortar except for QiFeng material, also can use the smudge or injection method is used as the lining body protection coating.
Refractory mortar classification
Refractory mortar according to the low and high refractoriness is divided into: common refractory materials, high-grade refractory materials, super refractory materials.
Refractory mortar according to the chemical characteristics can be divided into: acidic, neutral, alkaline refractory refractory refractory of refractory materials and special occasions.
Refractory mortar according to the composition of material of different can be divided into: dry soil, high aluminum refractory refractory clay mud, the siliceous refractory mortar, magnesia refractory mortar and so on.
Refractory mortar according to the different binder can be divided into: ceramic combined with refractory mortar which is made up of refractory fine aggregate and ceramic bond (plastic clay), hydraulic combined with refractory mortar mixture, chemical combination of refractory mortar.
Refractory mortar use
1, plasticity is good, construction is convenient;
2, bonding strength, strong corrosion resistance;
3, high refractoriness, high;
4, good resistance to slag penetration;
5, good thermal spalling.Refractory mortar is mainly used in coke oven, glass furnace, blast furnace hot blast stove, and other industrial kiln.Application industries: metallurgy, building materials, machinery, petrochemical, glass, boiler, electric power, steel, cement, etc.
联系方式
公司名称:巩义市万丰磨具磨料有限公司
公司地址:河南省巩义市建设路
郑经理
传 真:
Q Q: 3075794110
产品展示
包装展示
发货现场
为您精选
发送询价单
您对该公司的咨询信息已成功提交,请注意接听供应商电话。
联系人信息
请输入您的称呼
请输入正确的联系方式
请选择咨询问题
请输入正确的图形验证码
商家已收到您的消息,请注意接听供应商的来电~
确保商家能在第一时间与您取得联系
请留下您的联系方式
请输入正确的联系电话
请输入称呼或公司名称
请输入验证码