加工定制 : |
是 |
品牌 : |
顺成 |
型号 : |
SC-313A |
产品规格 : |
0.01~10mm |
外形尺寸 : |
120×150×280(mm) |
重量 : |
3.8(Kg) |
产品用途 : |
针对量测电线之绝缘体厚度 |
符合UL62、158 : |
电线电缆绝缘皮厚度计 |
本计符合UL62、1581等标准要求,是针对量测电线之绝缘体厚度而设计,采取桌上型式,量表栓于基座上,不需手提,针式量夹对于畸形管状之试料亦能精确测量.
主要技术参数
量测范围: 0.0110mm
荷重选择: 10gf、25gf、85gf
上 夹: 9.52×1.98、7.92×1.09、¢6.4mm
下 夹: ¢0.4、0.52、0.8、1.09mm
体 积: 12×15×28cm
重 量:约3.8kg
产品名称:SC-313B电线绝缘皮厚度计
本试验装置为桌上型,符合UL 2556标准要求。适用于检测电线绝缘体和被覆体的哑铃状试片厚度。
测量范围:0.0110mm, 小分度:0.01mm。(日本三丰百分表)
荷重砝码:85±3g
试样测头:ø6.4±0.2mm
下测帖:2×9mm
大理石台座:150×200mmm
试验方法
1、松开大理石台座固定旋钮,调整上下高度使百分表的指针指到零位。
2、取哑铃状被测样品,按下百分表的提升杆,将样品放在6.4mm测头
下,放下提升杆,直接读取百分表的数值。即被测样品的绝缘厚度。
UL 2556标准参考
4.2 Physical properties (ultimate elongation and tensile strength)
e) a dial micrometer having a 6.3 to 6.4 mm (0.248 to 0.252 in) diameter flat presser foot
exerting a total force of 0.83±0.03 N (3.0±0.1 ozf) on a rectangular anvil measuring
approximately 9 x 2 mm (0.35 x 0.08 in). The face of the anvil on the minor dimension shall be slightly convex. Alternatively, these measurements shall be made with a dead-weight dial micrometer having a presser foot 6.4±0.2 mm(0.248±0.010 in) in diameter and exerting a total of 85±3 gf or 0.83±0.03 N (3.0±0.1 ozf) on the specimen – the load being applied by means of a weight. The presser foot shall be at least 2 mm (0.08 in) onto the edge of the specimen for each measurement. Micrometers shall have a resolution and accuracy of 0.01 mm (0.001 in);
为您精选
发送询价单
您对该公司的咨询信息已成功提交,请注意接听供应商电话。
联系人信息
请输入您的称呼
请输入正确的联系方式
请选择咨询问题
请输入正确的图形验证码
商家已收到您的消息,请注意接听供应商的来电~
确保商家能在第一时间与您取得联系
请留下您的联系方式
请输入正确的联系电话
请输入称呼或公司名称
请输入验证码