皮革厂印染厂用聚合氯化铝 PAC生产厂家

联系方式

公司名称：承德万洋活性炭厂

公司地址：承德县下板城工业区

联系人：陈经理

联系电话：

聚合氯化铝简介 

       聚合氯化铝代号PAC，通常也称作净水剂或絮凝剂，它是介于ALCL3和AL(OH)3之间的一种水溶性无机高分子聚合物，化学通式为[AL2(OH)NCL6-NLm]其中m代表聚合程度，n表示PAC产品的中性程度。颜色呈黄色或淡黄色、深褐色、深灰色树脂状固体。该产品有较强的架桥吸附性能，在水解过程中，伴随发生凝聚，吸附和沉淀等物理化学过程。聚合氯化铝与传统无机混凝剂的根本区别在于传统无机混凝剂为低分子结晶盐，而聚合氯化铝的结构由形态多变的多元羧基络合物组成，絮凝沉淀速度快，适用PH值范围宽，对管道设备无腐蚀性，净水效果明显，能有效支除水中色质SS、COD、BOD及砷、汞等重金属离子，该产品广泛用于饮用水、工业用水和污水处理领域。

聚合氯化铝优势特点

       1、用量远低于传统混凝剂，净化后的水质优良。

       2、絮凝体形成快，沉淀迅速，比传统产品处理能力大。

       3、对水中碱度消耗量少，出水PH值降低少。

       4、产品水溶液不溶物低，透光性好，不会堵塞管道。

       5、适用的PH值范围广，在5.0-9.0范围内均可使用。

       6、对浊度，碱度，有机物含量变化适应性强。

       7、产品各项质量指标特别是重金属指标均满足GB15892-2008标准要求。

       8、残余游离铝量低，净化后水质符合国家标准要求。

       9、腐蚀性小，粉体容易溶解，优于其他同类产品。

聚合氯化铝理化指标

聚合氯化铝用途

       1、在石油工业上广泛用于含油污水的处理、油水分离、油田回注水的净化等。 

       2、它是工业污水、废水处理的理想 ，广泛用于冶金、电力、制革、医药、印染、化工等行业。 

       3、它是处理高氟水的理想 ，除氟效果良好，是重要的化工原料。在化工、铸造、水泥、耐火材料等方面使用。   

聚合氯化铝使用方法及注意事项

       1、液体产品可直接投加，也可以用水稀释后投加；固体产品应加水溶解后投加。稀释比例一般为：固体产品2-20%，液体产品5-50%（以重量百分比计）；
       2、药剂投加量一般为：液体产品3-40克/吨，固体产品10-300克/吨，具体投加量由用户根据搅拌实验和生产性实验来决定；
       3、本产品不能与其他化学药品混合存放，不得与有毒有害物共运共贮。
       4、液体产品采用聚乙烯塑料桶包装，每桶净重25KG，采用双层桶盖，内盖扣严，外盖旋紧，用户需要时，液体聚合氯化铝也可用贮罐车装运。

英文翻译

Contact information:

Company Name: Chengde Wanyang Activated Carbon Factory

Address: Chengde County xiabancheng Industrial Zone

Contact: Chen Manage

Tel:

Introduction of polyaluminium chloride

Polyaluminium chloride code PAC, usually also called water purifier or flocculating agent, it is between ALCL3 and AL (OH) 3 of a kind of water-soluble inorganic polymer, chemical general formula for [AL2 (OH) NCL6 - while NLm] which m on behalf of the polymerization degree, neutral degree n PAC products.Color yellow or pale yellow, dark brown, dark gray resin solid.Bridging the product has strong adsorption performance, in the process of hydrolysis, accompanied by condensation, adsorption and precipitation and other physical and chemical process.Polyaluminium chloride and the traditional inorganic coagulants the fundamental difference between the traditional inorganic coagulants as low molecular crystal salt, and the structure of polymeric aluminium chloride from morphological and changeable multiple carboxyl complex composition, flocculating settling speed, suitable for wide PH range, no corrosive to the pipeline equipment, water purification effect is obvious, to be effective in the removal of water color quality SS, COD, BOD and arsenic, mercury and other heavy metal ions, the products are widely used in drinking water, industrial water and wastewater treatment field.
Advantage in polyaluminium chloride
1, the dosage is far lower than the traditional flocculant, after purification, the water quality good.
2, the flocculation body forming fast, precipitation is rapid, is bigger than traditional products processing capacity.
3, the alkalinity of the water consumption, less water lower PH.
4, low product solution insolubles, pervious to light and will not clog pipes.
5, the applicable PH range, within the scope of 5.0 to 9.0 all can use.
6, the turbidity, alkalinity, organic matter content changes adaptability is strong.
7, product quality indicators, especially heavy metal indicator can satisfy the requirements of GB15892-2008 standard.
8, low residual free aluminum amount, after purification water quality meet the national standards requirements.
9, corrosive small, powder easily dissolved, superior to other similar products.

Polyaluminium chloride purposes
1, in the oil industry are widely used in the treatment of oily wastewater, oil-water separation, purification of the oil field water injection back. 
2, it is an ideal drug, industrial sewage and waste water treatment is widely used in metallurgy, electric power, leather, medicine, printing and dyeing, chemical industry, etc. 
3, it is an ideal drug treatment high fluoride water, fluoride in effect is good, is an important chemical raw materials.In the chemical industry, foundry, cement, refractories, etc.   
Polyaluminium chloride using method and the matters needing attention
1, the liquid product can be directly dosing, also can be diluted with water additive;Should add water dissolved after adding the solid products.2-20% dilution ratio is commonly: solid product and liquid product 5-50% (by weight percentage).
2, drug dosing quantity is commonly: 3-40 g/ton liquid products, solid product 10-300 - g/ton, concrete mixing dosing quantity by the user according to the experiment and productive experiment to determine;
3, this product can not be mixed with other chemicals storage, shall not be stored with poisonous harmful communist movement.
4, liquid product is polyethylene plastic drum, net weight 25 kg per barrel, USES the double barrel cover, inside cover buckle yan, cover and tighten, user needs, liquid polyaluminium chloride tank car loading is also available.

产品图片

联系方式

公司名称：承德万洋活性炭厂

公司地址：承德县下板城工业区

联系人：陈经理

联系电话：

Contact information:

Company Name: Chengde Wanyang Activated Carbon Factory

Address: Chengde County xiabancheng Industrial Zone

Contact: Chen Manage

Tel: